What kind of WHP numbers to expect on dyno day??
#1
What kind of WHP numbers to expect on dyno day??
Hey guys, I’m just curious on what numbers to expect with the following mods.: M6, forged 347, mild ported 243s(Performence valvejob and cleaned up runners) BTR stage 3 cam( BTR cam kit), LS6 intake, 85mmTB, compression 11.1:1, fast 36lb injectors, 1 3/4 longtubes with off road x-pipe.. thank you guys in advance!!
Last edited by Aaron Hernandez; 02-07-2019 at 12:38 AM.
Trending Topics
#15
TECH Veteran
iTrader: (40)
I also say around 380-400 Edit: Closer to 400. Seems like lately a lot of cars are dynoing higher with mild cams than they used to with a T rex or MS3.
I've seen plenty with equal mods and a FAST intake come in at 400-420 so it's hard to see yours be higher than 420.
I've seen plenty with equal mods and a FAST intake come in at 400-420 so it's hard to see yours be higher than 420.
Last edited by 00pooterSS; 02-07-2019 at 09:27 PM.
#16
ModSquad
iTrader: (6)
Most will agree that the “magic” here will be in the tune. Lots of power to be found there. I usually don’t bite at these type of things, but I’m gonna step up and say 407/380. I bet it’s gonna be a blast to drive, no matter what the stupid dyno says, and that’s all that really matters.
#17
Most will agree that the “magic” here will be in the tune. Lots of power to be found there. I usually don’t bite at these type of things, but I’m gonna step up and say 407/380. I bet it’s gonna be a blast to drive, no matter what the stupid dyno says, and that’s all that really matters.
#19
TECH Senior Member
iTrader: (4)
No idea really due to the two wild cards tuning & what type of dyno.
M6, forged 347, 11.1 to 1 compression
mild ported 243s - Perf. VJ & cleaned up runners
BTR stage 3 cam - 231/242 .617"/.592" 112+2
85mm TB, LS6 intake, fast 36lb injectors,
1 3/4 longtubes with off road x-pipe
428 whp & 392 Dyno-Jet
M6, forged 347, 11.1 to 1 compression
mild ported 243s - Perf. VJ & cleaned up runners
BTR stage 3 cam - 231/242 .617"/.592" 112+2
85mm TB, LS6 intake, fast 36lb injectors,
1 3/4 longtubes with off road x-pipe
428 whp & 392 Dyno-Jet
#20
TECH Enthusiast
Man, another suck the wind out of my sails thread. I am building a combo very similar to Aarons. Only TSP stage 2.5 CNC 243s and BTR 2 NA cam.
I know I know dynos are just a number and it's all in the tune and how it drives. Thankfully I have one of the best tuners on the west coast.
My car will be on the rollers on the 25th.
I know I know dynos are just a number and it's all in the tune and how it drives. Thankfully I have one of the best tuners on the west coast.
My car will be on the rollers on the 25th.
Last edited by Mr. Black; 02-09-2019 at 10:11 AM.