420ci sbc shortblock - $4800 obo
07-24-2009, 08:59 PM
#1
420ci sbc shortblock - $4800 obo All components are new and only have dyno time on them $4800 obo.
Block - Bowtie 2503 cnc raceblock with billet 4bolt caps on all 5 mains center 3 caps splayed, 4.155" bore, clearanced for 3.875" stroke, valley breathers and screens, Moroso hv/hp oil pump with anti cavitation slots ARP main studs & oilpan studs, Hamburger drag race pan with full right side kickout and oil drain for Procharger.
Crank - 3.875" Cola 4340 forged non twist vacuum degassed Clevite H bearings.
Rods - 5.85" 4340 forged Trickflow I beams (Callies) bushed for floating pins 7./16 ARP capscrews.
Pistons - Ross 2618 forged -16cc dish for boost 9.5:1 with 74cc combustion chamber head Tool steel wristpins, speed pro rings.
Cam - CompCams small base SR 262*/268* @ .050 .620/.618 w/1.6 rockers 114 lsa for boost.
Misc - Pete Jackson Dual idler quiet gear drive, Edelbrock alum 2pc timing cover.
Contact aero.coupe@hotmail.com if interested, thanks
Block - Bowtie 2503 cnc raceblock with billet 4bolt caps on all 5 mains center 3 caps splayed, 4.155" bore, clearanced for 3.875" stroke, valley breathers and screens, Moroso hv/hp oil pump with anti cavitation slots ARP main studs & oilpan studs, Hamburger drag race pan with full right side kickout and oil drain for Procharger.
Crank - 3.875" Cola 4340 forged non twist vacuum degassed Clevite H bearings.
Rods - 5.85" 4340 forged Trickflow I beams (Callies) bushed for floating pins 7./16 ARP capscrews.
Pistons - Ross 2618 forged -16cc dish for boost 9.5:1 with 74cc combustion chamber head Tool steel wristpins, speed pro rings.
Cam - CompCams small base SR 262*/268* @ .050 .620/.618 w/1.6 rockers 114 lsa for boost.
Misc - Pete Jackson Dual idler quiet gear drive, Edelbrock alum 2pc timing cover.
Contact aero.coupe@hotmail.com if interested, thanks
