C5 P1SC Procharger kit, low miles, A&A Bracket
#1
C5 P1SC Procharger kit, low miles, A&A Bracket
Up for sale is a Procharger P1SC HO kit. The kit itself has less than 1000 miles and is very clean. This was removed from a show car that was wrecked and parted out. There is no oil, dirt, on grime on any of the piping, intercoolers, or head unit. I cannot verify the kit is 100% complete, but it appears the majority of the components are there. You will need procharger oil, a belt, injectors, tuning, and possibly a few nuts and bolts. The kit includes the following:
Polished P1SC Head unit, includes ATI 4.25" 6 rib pulley
ATI Procharger bracket
Twin IC setup (3.5") with brackets
Piping from blower to IC with clamps and silicon couplers
ATI Bypass valve w/ filter
ATI Instruction manual
Extra Idler pulley for 6 rib
14 hose clamps, Red and black large silicon couplers
Radiator shroud (one of the blades broke on the fan, but still working just with slight vibration)
I am pricing the kit to move at $2900. (plus s/h and paypal) I'm also offering the option to include an A&A bracket for an additional $200.00. The A&A bracket includes the bolts and spacers needed for the 6 or 8 rib setups. If you wish to upgrade to the stage II components, a member on Corvette forum has the radiator cradle, shroud, intake pipe, and filter for cheap.
Please let me know if you have any questions at all - I of course always welcome all offers!
The pictures speak for themselves.
Entire Kit
Intercoolers with brackets
Piping w/ bypass valve and filter
Radiator Shroud
Head Unit
ATI Bracket
A&A bracket with 6 and 8 rib pulleys and hardware
Enjoy and thanks for viewing :thumbs:
Polished P1SC Head unit, includes ATI 4.25" 6 rib pulley
ATI Procharger bracket
Twin IC setup (3.5") with brackets
Piping from blower to IC with clamps and silicon couplers
ATI Bypass valve w/ filter
ATI Instruction manual
Extra Idler pulley for 6 rib
14 hose clamps, Red and black large silicon couplers
Radiator shroud (one of the blades broke on the fan, but still working just with slight vibration)
I am pricing the kit to move at $2900. (plus s/h and paypal) I'm also offering the option to include an A&A bracket for an additional $200.00. The A&A bracket includes the bolts and spacers needed for the 6 or 8 rib setups. If you wish to upgrade to the stage II components, a member on Corvette forum has the radiator cradle, shroud, intake pipe, and filter for cheap.
Please let me know if you have any questions at all - I of course always welcome all offers!
The pictures speak for themselves.
Entire Kit
Intercoolers with brackets
Piping w/ bypass valve and filter
Radiator Shroud
Head Unit
ATI Bracket
A&A bracket with 6 and 8 rib pulleys and hardware
Enjoy and thanks for viewing :thumbs:
Last edited by bad94sup; 09-09-2009 at 07:02 AM.
#6
Sick andrew.