2000 Formula WS6 NBM Roller
Thread Starter
8 Second Club
iTrader: (9)
Joined: Oct 2005
Posts: 1,085
Likes: 0
From: Ellicott City,MD
2000 Formula WS6 NBM Roller Selling my dad's 2000 Formula WS6 roller. We were told by the original owner that it was the last Formula WS6 produced. Car was originally a 6spd but it was converted to a powerglide. I still have the manual pedal assembly if needed.
Parts on the car:
8-point Chromemoly roll cage certified to 8.50
Spohn Tubular K-Member
Spohn Upper Control Arms
Spohn Lower Control Arms
Spohn Manual steering rack
Spohn Torque Arm w/ Driveshaft loop
Spohn Rear Lower Control Arms - Double Adjustable Spherical rod end
BMR Adjustable Panhard Bar
BMR Subframe connectors
Strange 12-bolt Rear end - 3.73 Spool - LPW Aluminum cover
QA1 Coilovers in the front
QA1 Shocks in the rear
Strange Brake Master Cylinder
Hurst Line Lock
Nasty Performance Fuel Cell
Front Bumper support cage
Removable Radiator Support
Power Glide Trans Cross member
RCI 5pt. Camlock harness (not pictured)
Racing switch panel (not pictured)
Engine bay was painted Semi-gloss black, Roll cage was painted with Rustoleum Hammertone.
Car has full interior except passenger seat.
Comes with interior wiring harness (not installed).
Comes with engine wiring harness gutted for race car with factory computer (included not installed).
Comes with custom fabbed valve covers engrave with LAST WS6.
Comes with a car cover too.
$6500
Parts on the car:
8-point Chromemoly roll cage certified to 8.50
Spohn Tubular K-Member
Spohn Upper Control Arms
Spohn Lower Control Arms
Spohn Manual steering rack
Spohn Torque Arm w/ Driveshaft loop
Spohn Rear Lower Control Arms - Double Adjustable Spherical rod end
BMR Adjustable Panhard Bar
BMR Subframe connectors
Strange 12-bolt Rear end - 3.73 Spool - LPW Aluminum cover
QA1 Coilovers in the front
QA1 Shocks in the rear
Strange Brake Master Cylinder
Hurst Line Lock
Nasty Performance Fuel Cell
Front Bumper support cage
Removable Radiator Support
Power Glide Trans Cross member
RCI 5pt. Camlock harness (not pictured)
Racing switch panel (not pictured)
Engine bay was painted Semi-gloss black, Roll cage was painted with Rustoleum Hammertone.
Car has full interior except passenger seat.
Comes with interior wiring harness (not installed).
Comes with engine wiring harness gutted for race car with factory computer (included not installed).
Comes with custom fabbed valve covers engrave with LAST WS6.
Comes with a car cover too.
$6500
Last edited by LS1SpeedAddict; Mar 16, 2011 at 09:18 AM.
Thread Starter
8 Second Club
iTrader: (9)
Joined: Oct 2005
Posts: 1,085
Likes: 0
From: Ellicott City,MD
I have a dash pad but it would probably break in shipping, all I have is spohn lower control arms.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
