i have a bunch of stuff i need to get rid off of my 98 z28. i will ship smaller items but i'd prefer local pick up and will meet within reason
98 complete harness. this includes all wiring from the firewall forward. nothing cut= $150 or boSOLD
4 channel 10 bolt. rear was completely rebuilt with all new timken bearings, an eaton posi, aam 3.73's, and a t/a cover. it has almost 18,000 on it and never made a noise at all = $500 or bo sold
front rotors are brembo blanks with hawk hps pads( less than 5,000) and rears are autozone stuff(1,000) =$125
spohn rod ended phb. on car adjustable. red =$100 or b/o SOLD
bmr poly lca's. red = $70sold
spohn 1" rear sway bar. red =$120 or b/o
bilstein shocks/struts. they have less than 17,000 on them =$200sold
bmr full length non adjustable torque arm. red =$100 sold
both front fenders. black =$125 for the pair or $75 each drivers side sold
rear bumper cover. black =$50 or b/o sold
drivers door. black =$75
a4 driveshaft =$75
halo headlights =$100sold
tinted tail lights. they are vht/ cleared and in good shape =$100sold
2 sets of rockers with bolts and pedestials+ $50 each
true duals dumped at the axle with single chambers. = $200
umi driveshaft loop ( above exhaust bent around this) =$60sold
rear hatch (black) with tinted glass =$100
stock 98 metal gas tank =$30
i also have a complete grey interior, radiator/fan assy, ect. post with any other needs and i'll see if i have it
98 complete harness. this includes all wiring from the firewall forward. nothing cut= $150 or boSOLD
4 channel 10 bolt. rear was completely rebuilt with all new timken bearings, an eaton posi, aam 3.73's, and a t/a cover. it has almost 18,000 on it and never made a noise at all = $500 or bo sold
front rotors are brembo blanks with hawk hps pads( less than 5,000) and rears are autozone stuff(1,000) =$125
spohn rod ended phb. on car adjustable. red =$100 or b/o SOLD
bmr poly lca's. red = $70sold
spohn 1" rear sway bar. red =$120 or b/o
bilstein shocks/struts. they have less than 17,000 on them =$200sold
bmr full length non adjustable torque arm. red =$100 sold
both front fenders. black =$125 for the pair or $75 each drivers side sold
rear bumper cover. black =$50 or b/o sold
drivers door. black =$75
a4 driveshaft =$75
halo headlights =$100sold
tinted tail lights. they are vht/ cleared and in good shape =$100sold
2 sets of rockers with bolts and pedestials+ $50 each
true duals dumped at the axle with single chambers. = $200
umi driveshaft loop ( above exhaust bent around this) =$60sold
rear hatch (black) with tinted glass =$100
stock 98 metal gas tank =$30
i also have a complete grey interior, radiator/fan assy, ect. post with any other needs and i'll see if i have it
Teching In
Pic of the rear bumper cover to killaknucks@live.com. Thanks.
Quote:
i snapped a couple but it's hard to get a good one because the car is against the back wall. i see your in the area so if you want to come by and check it out just let me knowOriginally Posted by The Black Plague
Pic of the rear bumper cover to killaknucks@live.com. Thanks. Quote:
i have the headlight brackets as shown below. the front bumper cover is gone but i have the crash bar and the foam. not sure if this helpsOriginally Posted by motaboata
Need the pieces headlights mount too and also front bumper Teching In
Looks clean man ill probably in the lancaster side sometime this week i can stop by then.
Quote:
cool just let me knowOriginally Posted by The Black Plague
Looks clean man ill probably in the lancaster side sometime this week i can stop by then. TECH Apprentice
Is the price for all 4 corners for the bilsteins? And are they SLP or HD? Also do you have the headliner if the car was a hard top?
Quote:
they are the hd's bought from strano and the price is for all 4. car is t-tops but i do have the headlinerOriginally Posted by IDriveChevy
Is the price for all 4 corners for the bilsteins? And are they SLP or HD? Also do you have the headliner if the car was a hard top? here are a couple pics of the door. if anybody needs any other pics just let me know
i also have a brand new Streetsweeper cam for $425 and ls6 coolant tubes for $35
Quote:
they are still on the car but i'll grab a couple tonight for yaOriginally Posted by 608kZ28
how bout pics of the rear sway and panhard bar? here's the best one we could get due the car being up against the back wall
Launching!
i'm interested in the torque arm..and potentially the shocks and rear swaybar, pm me a contact number or give me a ring sometime during the day 717-395-3599 -dan








