somethings missing!
somethings missing! 
car is at the body shop finally getting all holes and seams in the bay filled and smoothed. should be back wed all pretty with a nice base+clear black paint job
. then i can start mocking up the motor and clearancing for the super vic
possibly a 250 plate shot so i can run an 8.xx pass for less than $400 spent
what materials did you use that it's not looking so good anymore. i knew the car would never be torn down this far again so i decided to spend a little to have it done. i was gonna try it myself but i didn't want to regret it when it was too late. suprisingly it isn't to bad to have a body shop do it
what materials did you use that it's not looking so good anymore. i knew the car would never be torn down this far again so i decided to spend a little to have it done. i was gonna try it myself but i didn't want to regret it when it was too late. suprisingly it isn't to bad to have a body shop do it
possibly a 250 plate shot so i can run an 8.xx pass for less than $400 spent
what materials did you use that it's not looking so good anymore. i knew the car would never be torn down this far again so i decided to spend a little to have it done. i was gonna try it myself but i didn't want to regret it when it was too late. suprisingly it isn't to bad to have a body shop do it
what materials did you use that it's not looking so good anymore. i knew the car would never be torn down this far again so i decided to spend a little to have it done. i was gonna try it myself but i didn't want to regret it when it was too late. suprisingly it isn't to bad to have a body shop do it
I did all the work myself with bondo and had paint mixed and put it rattle cans. I did clear it and it looked good for a while but I spilled a bunch of fuel on it this year taking the intake off and it eat the clear off in one spot and looks like **** now
. if my electric huffer plan falls through i'll take that off your hands. i'm pretty sure i can use a can of compressed air to push that through so i don't have to fill the bottle as much
Trending Topics
Teching In
Joined: Oct 2005
Posts: 38
Likes: 0
No one would use it. I promised 1000 RWHP for $2.29 with NOS Brand Energy Drink, but I guess everyone was afraid.
Guaranteed 1kHP!! (That's 1 Kila-Horsepower)
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
That looks pretty good... Should hold up well.. i did the same to mine 2yrs ago with the first engine pull. It still looks great today with me swaping engines and doing a cam swap.. ya I pulled mine through the top.. You have less the 24hrs to go though to get that thing running for cecil tomorrow night..lol
thanks guys for the comments. i was probably expecting too much for what i spent and as usual i'm never satisfied with stuff i do to the car. i'm pretty sure with the motor in most of the stuff i'm unhappy with will be hidden. i was hoping that the seams would be completely gone but it is what it is