Shop car update
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Shop car update This is our shop car. It's a 2011 2SS with an A6 tranny.
Mods before Cam are ARH 2" headers and there #' dual exhaust, Airad cold air,160 t-stat.
Parts added - AFM/DOD delete with new lifters,3 bolt cam sprocket, oil pump,new covers, Our custom stage 1 cam 2xx/23x and patriot extreme springs. These are the onlt parts changed,with full tuning before/after.
Car is idling at 650rpm on the stock converter. Cam was picked to compliment the future Kenne Bell 2.8L blower.
Also a printout of stock vs now.
Thanks
Don
Mods before Cam are ARH 2" headers and there #' dual exhaust, Airad cold air,160 t-stat.
Parts added - AFM/DOD delete with new lifters,3 bolt cam sprocket, oil pump,new covers, Our custom stage 1 cam 2xx/23x and patriot extreme springs. These are the onlt parts changed,with full tuning before/after.
Car is idling at 650rpm on the stock converter. Cam was picked to compliment the future Kenne Bell 2.8L blower.
Also a printout of stock vs now.
Thanks
Don
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
This is our shop car. It's a 2011 2SS with an A6 tranny.
Mods before Cam are ARH 2" headers and there #' dual exhaust, Airad cold air,160 t-stat.
Parts added - AFM/DOD delete with new lifters,3 bolt cam sprocket, oil pump,new covers, Our custom stage 1 cam 2xx/23x and patriot extreme springs. These are the onlt parts changed,with full tuning before/after.
Car is idling at 650rpm on the stock converter. Cam was picked to compliment the future Kenne Bell 2.8L blower.
Also a printout of stock vs now.
Thanks
Don
Mods before Cam are ARH 2" headers and there #' dual exhaust, Airad cold air,160 t-stat.
Parts added - AFM/DOD delete with new lifters,3 bolt cam sprocket, oil pump,new covers, Our custom stage 1 cam 2xx/23x and patriot extreme springs. These are the onlt parts changed,with full tuning before/after.
Car is idling at 650rpm on the stock converter. Cam was picked to compliment the future Kenne Bell 2.8L blower.
Also a printout of stock vs now.
Thanks
Don
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
