Looking for advice in what heads to go with
#1
Thread Starter
TECH Fanatic
iTrader: (33)
Joined: Mar 2005
Posts: 1,434
Likes: 0
From: South Jersey/Moorestown
Looking for advice in what heads to go with
I'm going with a custom grinf 232/240 .618 .624 114 cam. Looking for a set of heads in the 800-1200 range. Also will be selling my 243's if I buy a set of heads.
I've also had the option on sending mine out to Advanced Induction for 800 to get them ported.
Looking for advice.
I've also had the option on sending mine out to Advanced Induction for 800 to get them ported.
Looking for advice.
Trending Topics
#8
#10
#11
#12
I haven't been keeping up on the ls cylinder heads for a while but last I checked the Patriot heads were some kinda welded head to ls6 specs but not a true 243.
Anyways those PRC's seem to make good numbers on this board. Your other options are gonna cost you twice as much, AFR, Trickflow etc...
The fact of the matter si thos 5.3 or well worked 243's milled will make some kickass power on a budget.