Open House/ Dyno Day April 21st
#64
#66
01 CamaroSS SLP + TheSilverOne, I am sure we can meet up w/ you guys if interested.
I've been fighting some driveline vibes in my car ever since I went to a crossmember mounted torque arm a few years ago. I swapped in my stock tranny mount this week (thinking it help) and F-ed up my pinion angle, so I gotta tweak that this week before the ride, damn thing is so sensitive. I'm getting close to dropping the car off with Don and going over the chassis for tweaking or best options, or just put it back on the tailshaft.
#67
[QUOTE=DannoWS6;16160199]For those cruising down from central MA, there should be a handfull of us going down together already.
01 CamaroSS SLP + TheSilverOne, I am sure we can meet up w/ you guys if interested.
I've been fighting some driveline vibes in my car ever since I went to a crossmember mounted torque arm a few years ago. I swapped in my stock tranny mount this week (thinking it help) and F-ed up my pinion angle, so I gotta tweak that this week before the ride, damn thing is so sensitive. I'm getting close to dropping the car off with Don and going over the chassis for tweaking or best options, or just put it back on the tailshaft.[/QUO
youre gonna have that vibration with that setup ....i have the same in my car but its worse cause i used a poly trans mount im pretty sure you wanna keep it mounted there though so its not on the tailshaft.
01 CamaroSS SLP + TheSilverOne, I am sure we can meet up w/ you guys if interested.
I've been fighting some driveline vibes in my car ever since I went to a crossmember mounted torque arm a few years ago. I swapped in my stock tranny mount this week (thinking it help) and F-ed up my pinion angle, so I gotta tweak that this week before the ride, damn thing is so sensitive. I'm getting close to dropping the car off with Don and going over the chassis for tweaking or best options, or just put it back on the tailshaft.[/QUO
youre gonna have that vibration with that setup ....i have the same in my car but its worse cause i used a poly trans mount im pretty sure you wanna keep it mounted there though so its not on the tailshaft.
#69
Im thinking 495?
#73
Yeah if I wanna go over 65 and keep my fillings in I won't be able too. I'm gonna go mess with it today after work. I had my poly trans mount in forever, not a problem until mounting the TA on the crossmember. My piece changes instant center a bit lower than factory and I know many are adjustable, might be related, I dunno. At this point I a more afraid of damage from vibration than damage from breaking a tailshaft.
#74
#75
if your coming down rt and wanna meet at 117 mr mikes exit 7 off 190 or if there is a better spot what time you plan on being up there for though ? i wanna be there before don is there lol jk
#77
I don't wanna go too early and wake up the neighbors.
#78