Plz help!!! Rear end...
Thread Starter
Teching In
Joined: Feb 2012
Posts: 36
Likes: 0
From: mechanicsburg,PA
Plz help!!! Rear end... my diff got messed up somehow by the person who owned the car before me
its a 98 v6 A4 and the diff got worse so im trying to find a rear end to replace it and called alot of local shops and cant seem to find any
let me know if you have one for sale or know where i can pick one up at im looking for 98-02 rear and i dont have traction control but i might as well upgrade so let me know the gearing
THANK YOU if u can help me!:
its a 98 v6 A4 and the diff got worse so im trying to find a rear end to replace it and called alot of local shops and cant seem to find any let me know if you have one for sale or know where i can pick one up at im looking for 98-02 rear and i dont have traction control but i might as well upgrade so let me know the gearing THANK YOU if u can help me!:
Im thinking of selling my 373 rear 4 channel 10 bolt. It needs a wheel bearing from the sound of it. I was driving on it as of last week. If you want it Ill sell it for $200. And I know a local guy for $120 he'll install a complete bearing and seal kit. Kit will cost about $120-140 depending where you buy. The rear and installer are in south jersey near delaware memorial bridge.
So for $450 you can have a fresh 373 rear.
So for $450 you can have a fresh 373 rear.
Thread Starter
Teching In
Joined: Feb 2012
Posts: 36
Likes: 0
From: mechanicsburg,PA
Im thinking of selling my 373 rear 4 channel 10 bolt. It needs a wheel bearing from the sound of it. I was driving on it as of last week. If you want it Ill sell it for $200. And I know a local guy for $120 he'll install a complete bearing and seal kit. Kit will cost about $120-140 depending where you buy. The rear and installer are in south jersey near delaware memorial bridge.
So for $450 you can have a fresh 373 rear.
So for $450 you can have a fresh 373 rear.
Thanks
Trending Topics
Thread Starter
Teching In
Joined: Feb 2012
Posts: 36
Likes: 0
From: mechanicsburg,PA
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
. Lots of miles on it but it was fine when I took it out. Thread Starter
Teching In
Joined: Feb 2012
Posts: 36
Likes: 0
From: mechanicsburg,PA
I'll get back to you soon after I see what my next pay check is ha 
There are 3 or 4 of these sitting in my local U-pull yard just outside of Taneytown. They'll pull them for you for and drop it in your truck for $500, or you can spend 30 minutes and DIY for hundreds less.
Thread Starter
Teching In
Joined: Feb 2012
Posts: 36
Likes: 0
From: mechanicsburg,PA
What is the name of the yard do you have a link? Phone number or anything to get ahold of them? Thanks!!
Im in the same boat as you are. Thinking my carrier bearings are shot, but I dont know until I open it up and have a look. It would be nice to find a place that has newer Fbody parts in stock around Harrisburg and doesnt want your first born for pieces.
Thread Starter
Teching In
Joined: Feb 2012
Posts: 36
Likes: 0
From: mechanicsburg,PA
