Cool28

iTrader: (2)

Just wondering how much a install/tune goes for. Got these heads just laying around for boost guess I should install them before I put the s/c on.

Be just heads think stock cam is pretty good for boost

chknhwk01

iTrader: (3)

IF YOUR GONDA,PUT HEADS ON,THEN GO WITH A GOOD,CAM,
AND THEN GET IT TUNE,BUY SOME BODY GOOD,SO YOU WILL GET,FULL
HORSE-POWER,OUT OF YOUR MOTOR,, H/C GOOD FOR ABOUT,80HP..WITH A GOOD TUNER....

Frans96SS

iTrader: (15)

Give us a call. We can get it taken care of for you.

stmz28

iTrader: (9)

I have a used brute speed blower cam for sale $300
Cam specs are:

Dur @ .050 232 int 240 exh

Lift .595 int .608 exh

Lobe Sep 115.0

Bob@BruteSpeed

iTrader: (16)

To the OP, this would be a great cam for you to use! Bob

Cool28

iTrader: (2)

What all seals do I need for a cam change? I'd do a new timing chain while I'm doing it.

jsteele90

iTrader: (13)

Timing cover gasket and seal and water pump gaskets. Dont forget a new balancer bolt.

chknhwk01

iTrader: (3)

NOTHING BUT THE BESTTTT.....CLICK ON PIC!!

Cool28

iTrader: (2)

Ok cool got most of that stuff with the supercharger. Just need timing cover gasket and seal.

Thanks

Cool28

iTrader: (2)

Well ordered that cam posted above, ls7 lifters and a slp oil pump. Read about putting a ls2 timing chain on a little late so have a stocker going on.

Now just need my fuel system to come in and install it so I can drive it to my house to install all this stuff lol.

Cool28

iTrader: (2)

Wonder how much boost I'll lose doing this? Maybe I can pulley up then:p

Frans96SS

iTrader: (15)

If you got a stock chain from the dealer it will be an LS2 chain... They all supersede to the same part number now.

Cool28

iTrader: (2)

Ah ok cool thank you.