Someone to build a short block in the Dayton area
#1
On The Tree
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a Gen IV block at RED to be dry sleeved. I'm looking for someone in the Dayton area, like within a 3 hour drive, to install the rotating assembly.
Molnar forged crank and pwr adr rods. I need the builder to spec the pistons and put it together.
Thanks!
Molnar forged crank and pwr adr rods. I need the builder to spec the pistons and put it together.
Thanks!
#4
TECH Fanatic
Join Date: Aug 2009
Location: Coast of San Mateo County Between Pacifica & HMB
Posts: 1,822
Received 220 Likes
on
131 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Their reputation is top notch (having competed and won several Engine Masters Competitions)
and I certainly would interview them given their proximity.
I interviewed 3 different builders from 5-9 hours driving distance from my home before choosing.
Certainly worth a phone call imo.
Good Luck
The following users liked this post:
SteveJewels (06-27-2021)
The following users liked this post:
NAVYBLUE210 (06-27-2021)