Mod #4....
06-01-2005, 11:02 AM
#1
Mod #4.... Just bought cam...I was going to go 02 LS6 cam but a deal came threw on a used Comp grind SPECS: 214-222 .559-.566 115LSA 111ICL.....Timing events should work very well with manifolds and peak right about 6000 with good tq across the board...
Now all I need is a Spring kit,Pushrods,PTB and Pulley which I'll get in about 2 or 3 weeks.I'm waiting on CNC'd manifolds by Hinson Supercars but if that falls threw (No CNC program for GTO's yet)then I'll hand port them myself...
Hopefully I'll have everything done in about a 5 or 6 weeks
Engine mods are done...I'm very happy with the careful mods I've picked for my project and most importantly it wont hinder everyday drivability.
Sup. tweeks,18's,slotted rotors and pads will come next yr.
I'm broke for a while
Now all I need is a Spring kit,Pushrods,PTB and Pulley which I'll get in about 2 or 3 weeks.I'm waiting on CNC'd manifolds by Hinson Supercars but if that falls threw (No CNC program for GTO's yet)then I'll hand port them myself...
Hopefully I'll have everything done in about a 5 or 6 weeks
Engine mods are done...I'm very happy with the careful mods I've picked for my project and most importantly it wont hinder everyday drivability.
Sup. tweeks,18's,slotted rotors and pads will come next yr.
I'm broke for a while
Last edited by JS; 06-01-2005 at 12:33 PM.
06-01-2005, 06:34 PM
#5
11 Second Club
iTrader: (1)
Join Date: Feb 2002
Location: NY
Posts: 3,934
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JS
Just bought cam...I was going to go 02 LS6 cam but a deal came threw on a used Comp grind SPECS: 214-222 .559-.566 115LSA Now all I need is a Spring kit,Pushrods,PTB and Pulley
06-01-2005, 08:08 PM
#6
that cam will probably idle like a stock car too... good choice.
Now toss the jug on it, and a set of the MT radials and see it run 11.50... and drive it home.
Just make sure that driveline is strait, I read the GMHTP article on the goat that BMR did, and the parts that they went thru in the driveline.. I's make sure before you make too much power that those items are taken care of, for a piece if mind if nothing else.
Now toss the jug on it, and a set of the MT radials and see it run 11.50... and drive it home.
Just make sure that driveline is strait, I read the GMHTP article on the goat that BMR did, and the parts that they went thru in the driveline.. I's make sure before you make too much power that those items are taken care of, for a piece if mind if nothing else.
06-01-2005, 11:14 PM
#7
Bob thank u for the offer but please let me pay u for the pushrods..
There 125 new and to just give them away,No dice bro I gotta throw u some coin..
Send me your address asap and I'll get a check out to u for say $60.00
I need your full name too,Just PM me....
There 125 new and to just give them away,No dice bro I gotta throw u some coin..
Send me your address asap and I'll get a check out to u for say $60.00
I need your full name too,Just PM me....
Trending Topics
06-02-2005, 08:48 AM
#8
I wanna thank Bob he wont take any money for the pushrods and all he asked was for a few chili's,atcoburgers etc....What a nice thing to do,Thanx bob I dont know what to say other than your a good man
Now go insult someone in only the way u can
Now go insult someone in only the way u can
06-02-2005, 09:43 AM
#9
TECH Senior Member
iTrader: (2)
Join Date: Mar 2002
Location: South of Heaven
Posts: 5,469
Likes: 0
Received 0 Likes
on
0 Posts
i will be going the same route pretty much
3200 vig
small 220ish cam
already got newera cai (Which is a heatsoak bitch, but we are fixing it)
bought the magnaflow x pipe and catback also
already got 18's with toyo proxy 1's
the TB is ported and also the car is tuned by don
I may do a pully and other small crap too
oh and I did the stereo mod
3200 vig
small 220ish cam
already got newera cai (Which is a heatsoak bitch, but we are fixing it)
bought the magnaflow x pipe and catback also
already got 18's with toyo proxy 1's
the TB is ported and also the car is tuned by don
I may do a pully and other small crap too
oh and I did the stereo mod
06-02-2005, 05:53 PM
#11
11 Second Club
iTrader: (1)
Join Date: Feb 2002
Location: NY
Posts: 3,934
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JS
I wanna thank Bob he wont take any money for the pushrods and all he asked was for a few chili's,atcoburgers etc....What a nice thing to do,Thanx bob I dont know what to say other than your a good man
Now go insult someone in only the way u can
Now go insult someone in only the way u can