Someone is bussy! pics
#1
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Someone is bussy! pics
sunday i pulled the tranny, and tore down most of the top half of the motor.
look how clean it is!!!
last night i tore the short block apart.
everything was perfect!! the only issue is i did brake onr top ring on the #7, but it wasnt bad at all. i could not beleve how clean it was, everything looked great, the worst bearing wasnt even bad! i was shocked to see the condition after all it has been threw
other then that, and on spot where my reused head gaskets looked like they may have blown threw, but it wasnt bad considering those gaskets where reused when i pulled my ls6 heads to go to the afr's
(i had to reuse them, i was racing the same night in mir, so no time to get new ones, and they held, so i didnt want to take it apart. lol)
the crank was perfect, and will be reused, the rods where perfect (may sell and get new ones just for insurance) i think im going to do new pistions because the old ones are just that, old. i may just have them cleaned and recoated not sure yet.
im going to do a new block also, the one i have is still the stock one from my car, and its been apart so much, im getting scared the holes will start to strip out and i will end up with a heila coil mess. lol
any way, i will try to get some more pics up. (not camera phone ones. lol)
look how clean it is!!!
last night i tore the short block apart.
everything was perfect!! the only issue is i did brake onr top ring on the #7, but it wasnt bad at all. i could not beleve how clean it was, everything looked great, the worst bearing wasnt even bad! i was shocked to see the condition after all it has been threw
other then that, and on spot where my reused head gaskets looked like they may have blown threw, but it wasnt bad considering those gaskets where reused when i pulled my ls6 heads to go to the afr's
(i had to reuse them, i was racing the same night in mir, so no time to get new ones, and they held, so i didnt want to take it apart. lol)
the crank was perfect, and will be reused, the rods where perfect (may sell and get new ones just for insurance) i think im going to do new pistions because the old ones are just that, old. i may just have them cleaned and recoated not sure yet.
im going to do a new block also, the one i have is still the stock one from my car, and its been apart so much, im getting scared the holes will start to strip out and i will end up with a heila coil mess. lol
any way, i will try to get some more pics up. (not camera phone ones. lol)
#3
12 Second Club
iTrader: (15)
Join Date: Jun 2004
Location: Rhode Island
Posts: 1,479
Likes: 0
Received 0 Likes
on
0 Posts
cool I kinda hope it's juat a head gasket in mine that went bad but well see. I may do a tear down tomorow and try to get to the track for the weekend to get my 11 sec slip.
What are you going to do next?
What are you going to do next?
#4
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nautilus
Sounds like the motor held up well to your abuse! How much beer did you drink in the process of tearing that apart...lol
i didnt drink much till after. lol
however when my stupid pully puller wouldnt hook the pully so i couldnt remove the cam, i was pissed lol so i drank alot then. hehe
im getting mine backfrom the person i lent it to today!
#5
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ace68
cool I kinda hope it's juat a head gasket in mine that went bad but well see. I may do a tear down tomorow and try to get to the track for the weekend to get my 11 sec slip.
What are you going to do next?
What are you going to do next?
im going to freshen it up. put it back in. send the tranny out to get checked out and if needed, repaired, im going to have the heads all cleaned up, and do new springs, valve job ect, and im going to possable do a 90/90 setup and add a 2nd stage
#6
TECH Addict
iTrader: (3)
Join Date: Apr 2005
Location: Dallas, TX / Boston, MA
Posts: 2,169
Likes: 0
Received 1 Like
on
1 Post
ya hi! what are you doing to the motor? bringing it back to stock? i can only imagine what you are planning to do to this thing... i'm sure you will keep with traditional Noyzee fashion and make it totally ridiculous!
good luck!
good luck!
#7
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slayer_taunu
ya hi! what are you doing to the motor? bringing it back to stock? i can only imagine what you are planning to do to this thing... i'm sure you will keep with traditional Noyzee fashion and make it totally ridiculous!
good luck!
good luck!
Trending Topics
#9
TECH Senior Member
iTrader: (2)
Join Date: Mar 2002
Location: South of Heaven
Posts: 5,469
Likes: 0
Received 0 Likes
on
0 Posts
if you can get it to last a whole season then tear downs in the winter, your doing something right. I would always tear it down anyway in the winter, regardless if it seemed fine. Im sure you got more go fast goodies on the waiting table
#11
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by PurEvl
if you can get it to last a whole season then tear downs in the winter, your doing something right. I would always tear it down anyway in the winter, regardless if it seemed fine. Im sure you got more go fast goodies on the waiting table
i think do to the fact i change the oil every time i race is why the inside looked new!!
#12
TECH Addict
iTrader: (3)
Join Date: Apr 2005
Location: Dallas, TX / Boston, MA
Posts: 2,169
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Noyzee
haha, not realy, just freshen it up, and maybe a little more cam
#13
TECH Addict
iTrader: (3)
Join Date: Apr 2005
Location: Dallas, TX / Boston, MA
Posts: 2,169
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by Noyzee
i think do to the fact i change the oil every time i race is why the inside looked new!!
#14
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by slayer_taunu
you should bottle that up and sell it as discount 2nd hand oil to the rest of us that like to get more than 1 mile out of an oil change
#15
TECH Junkie
iTrader: (11)
Join Date: Jan 2002
Location: Paxton, Ma.
Posts: 3,489
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Noyzee
yhea, it did!
i didnt drink much till after. lol
however when my stupid pully puller wouldnt hook the pully so i couldnt remove the cam, i was pissed lol so i drank alot then. hehe
im getting mine backfrom the person i lent it to today!
i didnt drink much till after. lol
however when my stupid pully puller wouldnt hook the pully so i couldnt remove the cam, i was pissed lol so i drank alot then. hehe
im getting mine backfrom the person i lent it to today!
#17
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
wj, its sfi
rhode
i need to, i have so many projects this winter, i need to get my car apart, see what it was doing and get redy to send everything out, and get parts ordered.
i have big plans, and getting the motor out gives me the room i need to start cutting and painting. then i have b-mans car to work on, then if money is good, tims car!
but i dont want mine to go without, so i figured i better not rest if i want to try to hang with the best. lol
rhode
i need to, i have so many projects this winter, i need to get my car apart, see what it was doing and get redy to send everything out, and get parts ordered.
i have big plans, and getting the motor out gives me the room i need to start cutting and painting. then i have b-mans car to work on, then if money is good, tims car!
but i dont want mine to go without, so i figured i better not rest if i want to try to hang with the best. lol
#19
8 second mod
Thread Starter
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
i'll be around later. the girls are here, we are eating dinner, then i was going to meet with loue to get the big puller.
i'll call when im done eating.
i'll call when im done eating.