Dash pic, almost done
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Dash pic, almost done I finished cutting and powder coating the template for the dash. i didnt have the hole saw for the tach so im getting that today, and i will mount that on the bottom right hand side.
looks pretty good. should be nice when its done.
and man the powder coater worked sweet!!!!!
anyone needs smaller parts done, let me know. its pretty cheep. probably do smaller parts for like 25-30 bucks!!
just need to order more powder. its very strong also, i bent a trial piece till it broke, and the coating did not chip!!!
looks pretty good. should be nice when its done.
and man the powder coater worked sweet!!!!!
anyone needs smaller parts done, let me know. its pretty cheep. probably do smaller parts for like 25-30 bucks!!
just need to order more powder. its very strong also, i bent a trial piece till it broke, and the coating did not chip!!!
Originally Posted by Noyzee
bad pic. sorry.
also, the shift light is going in the center!
also, the shift light is going in the center!
At least you could have color coded the trim rings
No tach
Marc
Originally Posted by 1st and goal
At least you could have color coded the trim rings
Marc
Looks like its "crimped" over the edge of the bezel, anyway to get it off without having it look like *** afterwards?
Brad, that's coming out pretty good.
Trending Topics
Looks good Brad, but consider tach mounting in position a little higher so that your eyeline of the tree is the same as your eyeline for vision of the tach, if you know what I mean. That's just my opinion--maybe you have another reason for mounting the tach down low....Again, looks good--you know a good tradesman appreciates good craftsmanship.... 
WJ
WJ LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
LS1TECH Sponsor
Joined: Dec 2001
Posts: 3,310
Likes: 0
From: I'm glad one of us finds this amusing...
Originally Posted by PA Z06
looks good
Why even post up a gay-*** blurry pic like that? Just busting *****!
Have your dad buy you a better camera, dammit! 
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
hey, i didnt know the pic was that bad till i posted it. it looked ok on my phone. lol
as for the trim rings, they will be, its a template. the tach is low because the shift light is going in the center, and it might obstruct the tach. don, of course its aluminium.
i have a beter cam, i have 2 beter cams, but the phone is just easy. lol
as for the trim rings, they will be, its a template. the tach is low because the shift light is going in the center, and it might obstruct the tach. don, of course its aluminium.
i have a beter cam, i have 2 beter cams, but the phone is just easy. lol
