It's on there.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
That along with a catch can still gets oil into the intake. The only wao to stop the oil vapors from getting in the intake and glazing it over is to not have the fumes be routed back into the motor. I know about teh emmisions blah blah.. but I think that once you've out a cam in a car, you're pretty much throwing that out the window IMO. Yes a breather will aloow moisture into the motor, like it allows teh vaprors to escapt the crankcase as pressure is developed, but if you change the oil like I do, about 4 times a year, and that is with about 2500 miles a year on the car, it's probably of no concern.
if you have a consumption problem go to the dealer and ask for the truck pcv valve it has a smaller hole than the f body one and is listed as a "fix" by GM, i did a catch can first and it helped some but not that much i did the pcv and it helped ALOT
Originally Posted by lilstephsls1
looks good dave! too bad you didn't stop by dons yesterday it would have been nice to see ya there
If Gary had waited for me I would have gone to Don's yesterday.
But then the intake would not be on the car.
Last edited by davered00ss; Mar 12, 2006 at 09:44 AM. Reason: misspelled word
Originally Posted by davered00ss
If Gary had waited for me I would have gone to Don's yesterday.
But then the intake would not be on the car.
But then the intake would not be on the car.
It was pretty busy at my house yesterday.I don't think there were any parking spots left.
Originally Posted by 99zman
pcv valve from what truck? thanks
Originally Posted by Slowhawk
It was pretty busy at my house yesterday.I don't think there were any parking spots left.
and not many winter beaters were there at all either