looks great! 
hand strong. 
rollbar pic's
After talking to you, Bob and Bruce, I just felt comfortable with Bruce the way he wanted to do the job, the time schedule, and I felt he was generally the most intrested in doing the job the way I wanted it done. I wanted a 6 pt done in the lighest possible way with the best possible safety/strenth possible, and the way it was done is exactly what I wanted.
Your place, NRC and Bruce all do some notch work, don't think that I feel any different then that.
Your place, NRC and Bruce all do some notch work, don't think that I feel any different then that.
TECH Addict
Joined: Jun 2002
Posts: 2,920
Likes: 57
Originally Posted by JL ws-6
After talking to you, Bob and Bruce, I just felt comfortable with Bruce the way he wanted to do the job, the time schedule, and I felt he was generally the most intrested in doing the job the way I wanted it done. I wanted a 6 pt done in the lighest possible way with the best possible safety/strenth possible, and the way it was done is exactly what I wanted.
Your place, NRC and Bruce all do some notch work, don't think that I feel any different then that.
Your place, NRC and Bruce all do some notch work, don't think that I feel any different then that.
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by scottywheels
Just wish you came back and talked to me jay.....would have been well worth it. Youhave seen what we do....better then anyone else out there..but Im glad you are atleast satisfied...Now maybe bruce with have my money..lol
why bring this into this thread?
looks great Jay, once its painted and back together it will be great.
Bruce does do some nice stuff.
TECH Addict
Joined: Jun 2002
Posts: 2,920
Likes: 57
cause i gave a price to jay on a 10 point and he never mentioned a 6 pt thats why.....and because I can....
Originally Posted by Noyzee
why bring this into this thread?
looks great Jay, once its painted and back together it will be great.
Bruce does do some nice stuff.
looks great Jay, once its painted and back together it will be great.
Bruce does do some nice stuff.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by scottywheels
cause i gave a price to jay on a 10 point and he never mentioned a 6 pt thats why.....and because I can....
does it really matter
JL got his work done at another shop its done he is happy and that is that..... Sure you did Scott. Let me go home and find that quote that you gave me... I can already tell you how it reads:
6 pt chromoly rollbar: 1600
Swing outs: 300 per door.
And this magic 1600 dollar rollbar... guess what, it's good to what?
10.0! Same as every other rollbar.... what makes it so special? I couldn't figure it out, neither could anyone else that saw the price and had their jaw drop and hit the floor, hence why you didn't do it.
Don't even try to say you gave me a quote for a 10 pt, you know damn well what I wanted, after going into the shop and explaining what I wanted done and how, there could be no doubt of that.You're trying to backpedal again like usual after making yoruself look like an ***, probably the same reason that you have worked at 3 different shops in the last 3 years... the last 2 could only put up with so much of your crap before they had ot give you the boot... anyone want to take a guess how long you'll be at this one?
You wanted to go down this road, well here we go. go ahead and try to fire back, I'm sure you'll come up with some lame BS story as usual to try to cover your ***, but the bottom line, everyone that knows you, knows this is all the truth.
IMO, the worst part of it your currnet empolyer probably doesn't have any idea what you're doing to his business... it's too bad too becasue he seems like a generally nice guy and does great work. too bad he has soemone like you doing his public relations.
6 pt chromoly rollbar: 1600
Swing outs: 300 per door.
And this magic 1600 dollar rollbar... guess what, it's good to what?
10.0! Same as every other rollbar.... what makes it so special? I couldn't figure it out, neither could anyone else that saw the price and had their jaw drop and hit the floor, hence why you didn't do it.
Don't even try to say you gave me a quote for a 10 pt, you know damn well what I wanted, after going into the shop and explaining what I wanted done and how, there could be no doubt of that.You're trying to backpedal again like usual after making yoruself look like an ***, probably the same reason that you have worked at 3 different shops in the last 3 years... the last 2 could only put up with so much of your crap before they had ot give you the boot... anyone want to take a guess how long you'll be at this one?
You wanted to go down this road, well here we go. go ahead and try to fire back, I'm sure you'll come up with some lame BS story as usual to try to cover your ***, but the bottom line, everyone that knows you, knows this is all the truth.
IMO, the worst part of it your currnet empolyer probably doesn't have any idea what you're doing to his business... it's too bad too becasue he seems like a generally nice guy and does great work. too bad he has soemone like you doing his public relations.
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by scottywheels
cause i gave a price to jay on a 10 point and he never mentioned a 6 pt thats why.....and because I can....
boy this thread turned nasty real quick...
back on topic...thats a nice job they did...if you dont mind me askin, what was the bill on something like that??
feel free to PM me if ya wanna leave it out of the thread.
thanx
rick
back on topic...thats a nice job they did...if you dont mind me askin, what was the bill on something like that??
feel free to PM me if ya wanna leave it out of the thread.
thanx
rick
Originally Posted by JL ws-6
what you talking about... there's still a plate on it LOL.
Originally Posted by scottywheels
thats a street car right jay...especially when its going low tens on motor....Jay did you get a new exhaust yet? Or are you....and did you here the mufflex with the spintech muffler its sick.
hey we used to call your white beast a "street car"
that car you drove everywhere and it went 10.30 