Where did it go?
something's missing
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by JL ws-6
gettig the rollbar done?
6pt, fully removeable door bars. after seeing some of his previous work i know it will come out exactly how i want it
sweet. I don't know how you plan to paint it, but I got this gloss black urethane paint that I'm doing mine with, with a brush no less. It's reall thick and cvers well, after the 2nd coat it really does look good, almost powdercoated. A small foam brush is working out very good as an applicator. The paint is a self-leveling paint too, so it's drying with zero brush streaks in it. WAY easier then masking off the entire car and going about it that way.
After climbing in and out of mine painting it, I understand the rmovable door bars, I didn't opt to put them in, but then again I don't drive my car much anymore so it's not a big deal, you still like to rive your,s probably a good move for sure.
Get pic's of it when it's done, I'm sure it will come out good!
After climbing in and out of mine painting it, I understand the rmovable door bars, I didn't opt to put them in, but then again I don't drive my car much anymore so it's not a big deal, you still like to rive your,s probably a good move for sure.
Get pic's of it when it's done, I'm sure it will come out good!
Originally Posted by JL ws-6
sweet. I don't know how you plan to paint it, but I got this gloss black urethane paint that I'm doing mine with, with a brush no less. It's reall thick and cvers well, after the 2nd coat it really does look good, almost powdercoated. A small foam brush is working out very good as an applicator. The paint is a self-leveling paint too, so it's drying with zero brush streaks in it. WAY easier then masking off the entire car and going about it that way.
After climbing in and out of mine painting it, I understand the rmovable door bars, I didn't opt to put them in, but then again I don't drive my car much anymore so it's not a big deal, you still like to rive your,s probably a good move for sure.
Get pic's of it when it's done, I'm sure it will come out good!
After climbing in and out of mine painting it, I understand the rmovable door bars, I didn't opt to put them in, but then again I don't drive my car much anymore so it's not a big deal, you still like to rive your,s probably a good move for sure.
Get pic's of it when it's done, I'm sure it will come out good!
Yea its main duty is street, the setup im getting should be nice and outta the way too no ankle biter pieces like the wolfe swingouts leave.
Thnaks for the tip on painting. im up in the air as to go wit por15 or just a simple paint like you stated. although i did see some sweet tough spray that the shop used on there own shop truck that looked mint and holds up to abuse too. even if it does chip easy as hell to touch it up. im going this weekend to see what paints are out there, i really dont wanna mask and spray id rather foam brush it
Originally Posted by badpewter-z
Yea its main duty is street, the setup im getting should be nice and outta the way too no ankle biter pieces like the wolfe swingouts leave.
Thnaks for the tip on painting. im up in the air as to go wit por15 or just a simple paint like you stated. although i did see some sweet tough spray that the shop used on there own shop truck that looked mint and holds up to abuse too. even if it does chip easy as hell to touch it up. im going this weekend to see what paints are out there, i really dont wanna mask and spray id rather foam brush it
Thnaks for the tip on painting. im up in the air as to go wit por15 or just a simple paint like you stated. although i did see some sweet tough spray that the shop used on there own shop truck that looked mint and holds up to abuse too. even if it does chip easy as hell to touch it up. im going this weekend to see what paints are out there, i really dont wanna mask and spray id rather foam brush it
The urethane stuff I got is actually used on boats and stuff, the guy that did my rollbar got it fro me from a marina. sherwan williams makes it. I'll get pic's of how it came out once the interior is back together, but it dried smooth as glass and is tough as nails (I tried chipping it on one of the floor plates as a durability test, I stabed it with a scrwedriver pretty hard, and it didn't leave a mark)
A couple coats of this stuff and it's good to go.