........... 
Hampton Roads People. In Here...
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Originally Posted by 99FormulaM6
so the guy who was the only person to help you move in and fix your car cant get a tow home? i thought we were better than that 
You too Poop Head... i thought u already knew that... you would just have to call and U know it wouldnt cost ya anything.....
12 Second Truck Club
Joined: Jun 2005
Posts: 80
Likes: 0
From: Al Asad, Iraq
Originally Posted by NVR KNO
oh shut up lil stink finger!!!! VMP is fine with me for a track rental also.... but its hard for me with my schedule. MIR is good for the fact of being open on Sunday.
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Originally Posted by steeltoe
hey sean whats this i hear casey beat you in the vette????????
Um if he did..... it wasnt with the Spray......
And with Seans new set-up your going to have a hard time keeping up with him.....
is anyone by chance good with bending and cutting hard steel tubing?? I'm wanting to re-plumb my nitrous kit... and clean it up a bit under the hood.
Edit: I already have a rolld of 3/16 hard steel line, swedgelock bender, cutter and flaring tool.. its just been a while since I messed with it. and another set of eyes usually helps bending up lines like that. I just need to double check that the flaring tool I have is for the 37* flare that the high pressure fittings call for.
Edit: I already have a rolld of 3/16 hard steel line, swedgelock bender, cutter and flaring tool.. its just been a while since I messed with it. and another set of eyes usually helps bending up lines like that. I just need to double check that the flaring tool I have is for the 37* flare that the high pressure fittings call for.
The camaro looks great shawn. It should work a little better without a broke shock this time. Make sure you post some times when you get back.
Ben, I know you got your stuff to bend and flair the tubing, but I sell some pretty nice bending and flaring tools if you ever want to upgrade. The flair tool goes from 1/8- 3/4 and tube insertion height is controlled automaticly.
Ben, I know you got your stuff to bend and flair the tubing, but I sell some pretty nice bending and flaring tools if you ever want to upgrade. The flair tool goes from 1/8- 3/4 and tube insertion height is controlled automaticly.
Originally Posted by NA$TY-TA
In response to MIR being far yes thats true...... but well worth the drive, + what else is open on Sundays..... for Sean i know he's not worried because he knows if he brakes he has quite a few people who will come get him and tow him home.... (he really doesnt have any other days off either..)
Now on the VMP subject..... Maybe a track rental is different but i wont be going back to a T&T night ever again....
Even a BIG Event....i wasnt impressed..... a 4 HR delay... i just thought the track was run very poorly.... prep was good but running it wasnt....
Ill be running 1/8 mile for a bit when mines back out..... thats were your 1/4 et is at..... most try and add more power to compensate for there crappy 60' times and decrease there ET that way.....
I guess im just ranting....
Kyle
Now on the VMP subject..... Maybe a track rental is different but i wont be going back to a T&T night ever again....
Even a BIG Event....i wasnt impressed..... a 4 HR delay... i just thought the track was run very poorly.... prep was good but running it wasnt....
Ill be running 1/8 mile for a bit when mines back out..... thats were your 1/4 et is at..... most try and add more power to compensate for there crappy 60' times and decrease there ET that way.....
I guess im just ranting....
Kyle
I agree, they dont run VMP worth a **** but I'm not talking about test n tune or some event. Just a track rental for people who really want to run there cars. Oh yeah, it will most likely be at the end of sept. now. Hopefully once it has been "officially" established people will sign up and actually show up!!
12 Second Truck Club
Joined: Jun 2005
Posts: 80
Likes: 0
From: Al Asad, Iraq
Originally Posted by NA$TY-TA
Um if he did..... it wasnt with the Spray......
And with Seans new set-up your going to have a hard time keeping up with him.....
And with Seans new set-up your going to have a hard time keeping up with him.....
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
TECH Enthusiast
Joined: Apr 2005
Posts: 678
Likes: 0
Originally Posted by steeltoe
hey sean whats this i hear casey beat you in the vette????????
TECH Enthusiast
Joined: Apr 2005
Posts: 678
Likes: 0
Originally Posted by 99FormulaM6
so the guy who was the only person to help you move in and fix your car cant get a tow home? i thought we were better than that
TECH Enthusiast
Joined: Apr 2005
Posts: 678
Likes: 0
Originally Posted by NA$TY-TA
Um if he did..... it wasnt with the Spray......
And with Seans new set-up your going to have a hard time keeping up with him.....
And with Seans new set-up your going to have a hard time keeping up with him.....
12 Second Truck Club
Joined: Jun 2005
Posts: 80
Likes: 0
From: Al Asad, Iraq
Originally Posted by NVR KNO
please i waited til 3rd gear to spray and still pulled his ***. you probably havent even talked to him so i dont know why im replying to this.
Last edited by steeltoe; Jul 26, 2007 at 06:50 PM.
12 Second Truck Club
Joined: Jun 2005
Posts: 80
Likes: 0
From: Al Asad, Iraq
Originally Posted by NVR KNO
he had a hard time with just longtubes and intake.... his motor blew.
Originally Posted by NVR KNO
if i remember correctly, ive helped on quite a few occasions with his car.... even taking the whole damn motor out.... so how bout that!!
and i was the only person who helped him move in...the day after i had surgery too!
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Originally Posted by 99FormulaM6
i sat on the side of the road waiting for a tow truck, cut a hole in his garage...etc
and i was the only person who helped him move in...the day after i had surgery too!
and i was the only person who helped him move in...the day after i had surgery too!
Thanks again man... havent seen ya yet... you gunna be at Bass pro on Sat and to Don Pablo's on Sat night???
Originally Posted by NA$TY-TA
Thanks again man... havent seen ya yet... you gunna be at Bass pro on Sat and to Don Pablo's on Sat night???
If I go to Bass Pro, I will be in the honda or the jeep. My tranny mount needs to be replaced asap, and my wonderful optima battery is leaking from the negative terminal...
ill be at Don Pablos though, I have a seat reserved next to Sean
Originally Posted by promod1955
Ben, I know you got your stuff to bend and flair the tubing, but I sell some pretty nice bending and flaring tools if you ever want to upgrade. The flair tool goes from 1/8- 3/4 and tube insertion height is controlled automaticly.
I may need to get a 37* flaring tool. I do believe mine is 45*... thats all I will need. my bender is good for what I want to do and no more than I use the thing, I cant really justify getting something different just yet... if the project gets too deep and I end up needing something else besides what I have here now I'll let you know though. Thanks man.
TECH Enthusiast
Joined: Apr 2005
Posts: 678
Likes: 0
Originally Posted by 99FormulaM6
i sat on the side of the road waiting for a tow truck, cut a hole in his garage...etc
and i was the only person who helped him move in...the day after i had surgery too!
and i was the only person who helped him move in...the day after i had surgery too!
TECH Enthusiast
Joined: Apr 2005
Posts: 678
Likes: 0
Originally Posted by steeltoe
yea bc i make **** like that up. thats what he told when i was at his house before he left.
TECH Enthusiast
Joined: Apr 2005
Posts: 678
Likes: 0
Originally Posted by steeltoe
umm did you forget the part that i had ZERO TRACTION. thats the biggest problem if that POS truck i spend more time spining. when the truck does hook it moves. i still say i could have beatin you then.