wtb
j/k 
There called steamers 
lol.I went to cartek last week and Julio turned off the knock sensors. My y pipe is banging & it's so bad I don't want to drive the car.Maybe the poly mounts will stop the movement.
lol.I went to cartek last week and Julio turned off the knock sensors. My y pipe is banging & it's so bad I don't want to drive the car.Maybe the poly mounts will stop the movement. 
I picked up mine at Pepboys for around $20 a peice if I remember correctly. You will need to re-use the outer shells which takes some modification, but isn't difficult to do. You simply drill out the rivets holding the two halfs together, then use the supplied bolts to bolt it back together. I've done both of mine and it made a huge difference. My y-pipe is tucked up about 1.5" from my floor board and no banging at all. I need to get under there and re-install the poly trans mount one of these days to get rid of shifter shake now.
pete you ugly dog. do you have a poly tranny mount already? autozone sells them in stock usually. and if you get the poly motor mount, you only need one side, especially if you have poly tranny mount as well.
Originally Posted by 2MCHPWR
pete you ugly dog. do you have a poly tranny mount already? autozone sells them in stock usually. and if you get the poly motor mount, you only need one side, especially if you have poly tranny mount as well.
