Slowhawk fixed the carnage
Thread Starter
Teching In
Joined: Mar 2007
Posts: 12
Likes: 0
From: Merrimack, NH
Slowhawk fixed the carnage Well after another highly successful track season LOL. Don, Slowhawk on this board went to work. Thanks Don, as usual you got it up and running in record time. Lets see, tourque tube replaced, a yearly thing. This year he replaced it with a stronger one for all you vette owners. He can come in anytime with the technical details but this one supposed to be bullet proof. The spec twin disc was sent back for freshening and damn the thing drives stock. The rear end was repaired something about splines. Who knows I just break it , he fixes it. 
Hey when i think about it how the hell did I go 10.8 in the Qt. at the end of the season. He also upgraded the PCM to a 02 and put a blowoff valve on. Springs replaced. Thanks again Don, car is riding great thanks to you.
Hey when i think about it how the hell did I go 10.8 in the Qt. at the end of the season. He also upgraded the PCM to a 02 and put a blowoff valve on. Springs replaced. Thanks again Don, car is riding great thanks to you. How come every time Brent posts the word "carnage" is always a part of it 
Awesome news, It's a give take relationship with you guys. Don gives you something better every time, and you take it back when it breaks.
Seriously sounds like you will have a hard time atleast breaking the TQ tube this time. I'm sure the car drives awesome once again.
Awesome news, It's a give take relationship with you guys. Don gives you something better every time, and you take it back when it breaks.
Seriously sounds like you will have a hard time atleast breaking the TQ tube this time. I'm sure the car drives awesome once again.
Jeez he's fast! I was just there picking my car up on Sunday and the motor had just gone in! Awesome looking set up man, i am sure i'll see you around some this year, as i'll probably be down at Don's a few times over the course of the season.
Anthony
Anthony
Trending Topics
Thread Starter
Teching In
Joined: Mar 2007
Posts: 12
Likes: 0
From: Merrimack, NH
Joe, it's for driveability now. No more surging at low speeds low RPM's. I would have hated to be there that day watching Don wiring it up. Danno, found it in the Thesaurus... great word for like Marcel said what am I going to break next. Boosted I think you saw another red vette not mine. Out with one in with another. Cant wait for April 1st.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Your welcome Brent (destroyer of all Corvette parts)
We did the solid torque tube,rebuilt SPEC dual clutch(old one was good),Rebuilt rear posi(plates shattered),added blow off valve and rewired/tuned the car with the 02 computer setup.
The computer was done to open up the tuning some more.The geberic 2bar SD tune on the 1997 computer worked but the 02 setup has alot more options which help drivability.
Hopefully the Brent master won't break anything this year
We did the solid torque tube,rebuilt SPEC dual clutch(old one was good),Rebuilt rear posi(plates shattered),added blow off valve and rewired/tuned the car with the 02 computer setup.
The computer was done to open up the tuning some more.The geberic 2bar SD tune on the 1997 computer worked but the 02 setup has alot more options which help drivability.
Hopefully the Brent master won't break anything this year
Ya know i think you are right, i did see your car but it was a few weeks ago. The one i saw this weekend was a 416 l92 block with a blower on it!
Well i still cant wait to see it up at the track!
Well i still cant wait to see it up at the track!
Last edited by BoostedLT5; Feb 27, 2008 at 01:53 PM.
Thread Starter
Teching In
Joined: Mar 2007
Posts: 12
Likes: 0
From: Merrimack, NH
Hey, RI Red, whats wrong with 1.6's.
brent is the master of destruction 
as always brent you drive the hell outta the car and see what we need to strenthen on other cars
enjoy it this year and ill gladly line up with you like you said earlier this year
battle of the shifters baby
as always brent you drive the hell outta the car and see what we need to strenthen on other cars enjoy it this year and ill gladly line up with you like you said earlier this year
battle of the shifters baby 