Need ABS InOp codes cleared in NNJ
08-18-2008, 06:39 AM
#1
Launching!
Thread Starter
iTrader: (5)
Join Date: Mar 2004
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Need ABS InOp codes cleared in NNJ anyone in the NNJ area, Morris/sussex county that can clear codes?
I went to the track and since then my ABS Inop light is on. Just need someone to clear codes if any.
thanks
I went to the track and since then my ABS Inop light is on. Just need someone to clear codes if any.
thanks
08-18-2008, 09:45 AM
#2
CARTEK Racing
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
It should go away on its own, I don't think its a DTC, so I don't think you can "Clear" it with an auto-tap or the like.
I've had an ABS INOP light come on a few times after multiple dyno runs or driving around a long time on skinnies and slicks. But they have always gone away.
I could be wrong though...
But from what I have seen, people who remove their ABS, have to disable the light, no way to make it not show up.
I've had an ABS INOP light come on a few times after multiple dyno runs or driving around a long time on skinnies and slicks. But they have always gone away.
I could be wrong though...
But from what I have seen, people who remove their ABS, have to disable the light, no way to make it not show up.
08-18-2008, 10:05 AM
#3
Launching!
Thread Starter
iTrader: (5)
Join Date: Mar 2004
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
It hasn't gone away yet and I drove it for a while. I know these sometimes throw error codes. Ill have to check the wheel sensors to see if they came loose or something.
08-18-2008, 10:08 AM
#4
CARTEK Racing
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
That may be a different issue, but I know different size wheels/tires can throw and ABS-INOP light. Even a tire that is underinflated and therefore shorter, if driven for a long time can probobly throw that light.
08-18-2008, 10:20 AM
#5
Launching!
Thread Starter
iTrader: (5)
Join Date: Mar 2004
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
yeah, well I did have Drag radials that were underinflated...wonder if that caused the ABS light. Never did before. In any case it hasnt gone off yet and I disconnected the battery, reset the PCM, checked the ABS Bat fuses. Maybe I need to get on it again..
