I bought a 92 Corvette, if anyone wants to get hands dirty.
#21
TECH Apprentice
iTrader: (7)
Join Date: Jun 2006
Location: Deltona, FL
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Dammit, I told you those bolts were loose! Just use some washers for that spacer...
Glad it runs good. I wonder if the wires were arcing, or just the opti. Regardless, I would be glad to get that all squared away and MUCH cleaner under there.
Glad it runs good. I wonder if the wires were arcing, or just the opti. Regardless, I would be glad to get that all squared away and MUCH cleaner under there.
#22
TECH Apprentice
Thread Starter
iTrader: (19)
Join Date: May 2007
Location: Deland, FL
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
I tightened all the ones we found. The damn fuel rails were less than hand tight. I am pulling the valve covers to make sure the tightened the heads. What a friggan moron!!!!!
I hope this dumbass didnt work on too many parts. We actually found more loose bolts ont he brackets for the alt and a/c after you left. WOW this guy was an idiot.
It is ok, it is in good hands now We will fix it and make it a nice car again. Its like an abused dog at Judy's Pet Rescue. But its a Corvette
I hope this dumbass didnt work on too many parts. We actually found more loose bolts ont he brackets for the alt and a/c after you left. WOW this guy was an idiot.
It is ok, it is in good hands now We will fix it and make it a nice car again. Its like an abused dog at Judy's Pet Rescue. But its a Corvette
#23
TECH Apprentice
iTrader: (7)
Join Date: Jun 2006
Location: Deltona, FL
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
Ah. No doubt. 2 hours under the hood and it went from disgusting to workable. That took a couple bucks in cleaner and some elbow grease. How someone lets a vette get that bad. You are right. Temporary or not, you will get it back to nice.