any alignment expert here?
https://ls1tech.com/forums/image.php...ine=1194732633
Free Cooler, Free shipping always, 2 year warranty Trans/Coverter combos, No Core or Core charge, $150 LS1 core buy back, All trans Dyno Tested to Be sure it works when you get it.Customer videos, Tech Thread, Open 7 Days a Week! Call or http://opi.yahoo.com/online?u=performabuilt&m=g&t=2
Click Banner for Website.Not Just Built.....PerformaBuilt!
got it working late last night/early AM
mainly curious as to the readings I got on the rear.
Im going to switch the toe heads to front today and see what this comes up with.
02 TA stock 245-50x16
rear:
camber left 0.5 right -0.2
cross camber 0.7
toe left -1.41 right 1.38
total toe -0.02
setback 0.10
thrust angle 1.42
front
camber left -0.2 right -0.6
toe left -1.98 right 0.85
total toe -1.13
Last edited by toplessHO; Apr 20, 2010 at 07:15 AM.
Trending Topics
The Best V8 Stories One Small Block at Time
got it working late last night/early AM
mainly curious as to the readings I got on the rear.
Im going to switch the toe heads to front today and see what this comes up with.
02 TA stock 245-50x16
rear:
camber left 0.5 right -0.2
cross camber 0.7
toe left -1.41 right 1.38
total toe -0.02
setback 0.10
thrust angle 1.42
front
camber left -0.2 right -0.6
toe left -1.98 right 0.85
total toe -1.13
update to 04 specs
redid with the heads in right position
had to reset camber on front,right was
a little more than left.
I have the specs you posted(I think On GTO LS1 forum)
but maybe Im reading wrong because you show alot more camber than factory specs.
I set camber as close to zero as I could get.My buddy sets his auto cross cars up for a lot of neg camber.
95-02 except 95-96 w/Goodyear Eagle RSA tire
camber 0.40* +/- 0.50*
caster 4.80* +/- 0.50*
total toe 0.00* +/- 0.20*
not necessarily good for outside tire wear.










