Need To Borrow FAST Intake (Tampa Area)
#1
On The Tree
Thread Starter
iTrader: (4)
Join Date: Jun 2007
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Need To Borrow FAST Intake (Tampa Area)
I am running a swapped car and will need to make room in the firewall for a FAST intake. I plan on getting one down the line and would like to see how much room I need to make before making the purchase. This would involve borrowing a FAST intake for at most an hour. It shouldn't matter if it's 90,92, or 102, or if it's LS1,3,7. If anyone is willing to help me out, it's worth $20 to me. Thanks in advance.
Edit: I can just take measurements on your installed one, also!
Edit: I can just take measurements on your installed one, also!
Last edited by Troux; 08-01-2010 at 06:32 PM.
#5
TECH Enthusiast
iTrader: (7)
Join Date: Oct 2003
Location: jacksonville, fl
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
I am a tranny builder so dont take my word for this but from the fast intakes that I have seen done the only dimension that I have seen that looks different is on the bottom in the valley you have to use the flat head bolts to keep it from sitting on top of the bolt heads but from what i have seen there isnt really any difference length wise that I can see from a ls6 intake
#7
On The Tree
Thread Starter
iTrader: (4)
Join Date: Jun 2007
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
I am a tranny builder so dont take my word for this but from the fast intakes that I have seen done the only dimension that I have seen that looks different is on the bottom in the valley you have to use the flat head bolts to keep it from sitting on top of the bolt heads but from what i have seen there isnt really any difference length wise that I can see from a ls6 intake