Lashway Motorsports tests 102mm Nitrous Plate system!
#1
FormerVendor
Thread Starter
iTrader: (14)
Join Date: Mar 2010
Location: Pompano Beach, FL
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Lashway Motorsports tests 102mm Nitrous Plate system!
We're happy to announce that we've started working closely with Nitrous Express on a bitchin' plate system designed to be used with the FAST 102 mm manifolds! We will be installing one of these we kits on a 2010 SS later this month, along with one of our custom ground cams and some other stuff
Check out the full story on our blog page:
http://www.lashwaymotorsports.com/blog/
Thanks!
Erik@Lashway
Check out the full story on our blog page:
http://www.lashwaymotorsports.com/blog/
Thanks!
Erik@Lashway
Trending Topics
#9
FormerVendor
Thread Starter
iTrader: (14)
Join Date: Mar 2010
Location: Pompano Beach, FL
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Well, we got eveything in and are starting to build some one-off brackets for the noids. I will snap a pic of the FAST 102 and the plate when I get a chance on Monday.
It's a nice, clean looking set up.
It's a nice, clean looking set up.
#12
FormerVendor
Thread Starter
iTrader: (14)
Join Date: Mar 2010
Location: Pompano Beach, FL
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
The thing about these that we love is ease of installation. They bolt right on to your manifold, and evenly introduce the fuel and gas to the intake...
I have to tell you though, I was completely blown away by the quality of this kit. From the noids to the lines, and even the bottle! The valve is one of a kind and flows more nitrous than your standard 45* valve. NX really provides the customer with quality made products manufactured in the USA!
We're using an NX perimeter plate on our Project BackLASH car...
Very exciting stuff!
I have to tell you though, I was completely blown away by the quality of this kit. From the noids to the lines, and even the bottle! The valve is one of a kind and flows more nitrous than your standard 45* valve. NX really provides the customer with quality made products manufactured in the USA!
We're using an NX perimeter plate on our Project BackLASH car...
Very exciting stuff!
#13
Yep I Deff Down To Get A Kit After My Car Hits The Road
The thing about these that we love is ease of installation. They bolt right on to your manifold, and evenly introduce the fuel and gas to the intake...
I have to tell you though, I was completely blown away by the quality of this kit. From the noids to the lines, and even the bottle! The valve is one of a kind and flows more nitrous than your standard 45* valve. NX really provides the customer with quality made products manufactured in the USA!
We're using an NX perimeter plate on our Project BackLASH car...
Very exciting stuff!
I have to tell you though, I was completely blown away by the quality of this kit. From the noids to the lines, and even the bottle! The valve is one of a kind and flows more nitrous than your standard 45* valve. NX really provides the customer with quality made products manufactured in the USA!
We're using an NX perimeter plate on our Project BackLASH car...
Very exciting stuff!
#14
FormerVendor
Thread Starter
iTrader: (14)
Join Date: Mar 2010
Location: Pompano Beach, FL
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
Well, great news! Everything is installed on the 2010 SS and we're ready to let her rock and roll on Monday. We did a whole load of custom stuff to the guys car, so it took a while.
Pics and numbers coming soon!
Erik@Lashway
Pics and numbers coming soon!
Erik@Lashway
#16
FormerVendor
Thread Starter
iTrader: (14)
Join Date: Mar 2010
Location: Pompano Beach, FL
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
The customer needed his car for an event this weekend, so we did not tune for n20. It's back at the shop now and ready for the spray. Updates and videos to come!
Erik@Lashway
Erik@Lashway