anybody dealt with this guy?.....
not sure, i was referred to him by one of my friends here....my friend got his 383 built by mark, he said mark used to be a gm master tech for a long time and now he does his own work, he also built a twin vortech car back in the 90s that was on bowtie mag...
cool cool, im probably going to get my motor pulled, cam installed, a new main bearing put in, and my tranny built at the same time....i was hoping to get all that done for under 4k....
hopefully he can do that....labor to put a cam in was in the 1k dollar range, a built tranny was about 1500 bucks, and im not sure how much someone would charge to do a bearing....
hopefully he can do that....labor to put a cam in was in the 1k dollar range, a built tranny was about 1500 bucks, and im not sure how much someone would charge to do a bearing....
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
mark is an awesome guy. i have know him for 10 years. he does awesome work. is very reasonable. he use to work at classic corvette. so to say the least he knows his ****. and when it comes to getting tranny work done i dont know anyone better. he is a stand up guy. if you want to know anything else about him let me know.
well to tell the truth im not a sheep....i know a grand is overkill.....but i figure to round it off, with place's charging 80$ an hour in labor....for a 12 hour job....im not exactly saying he'd charge me that
i honestly dont have 12 hours in a day where i can rip apart my car, let alone the tools for changing the valve springs the right way....
yellowbird shoot me a pm....
whitels1 thats what ive been hearing from a few guys here, but i wanted to see if any tampa people knew him....im actually gonna be calling him this evening and getting some numbers....
IM SICK OF THIS **** SITTING IN MY ROOM.....2K WORTH OF PARTS STARING ME DOWN FOR 2 MONTHS
i honestly dont have 12 hours in a day where i can rip apart my car, let alone the tools for changing the valve springs the right way....
yellowbird shoot me a pm....
whitels1 thats what ive been hearing from a few guys here, but i wanted to see if any tampa people knew him....im actually gonna be calling him this evening and getting some numbers....
IM SICK OF THIS **** SITTING IN MY ROOM.....2K WORTH OF PARTS STARING ME DOWN FOR 2 MONTHS
well i talked to him.....he's kinda backed up just like everyone else.....he said hed replaced any bearings and polish the crank and fix any other lower end problem, build the A4, install the cam and springs and tune it for less then 4k .....ive gotta get something done
a good 4L60e cost a minimum of 2K if you want to stand behind it. so adding that 1K for a cam install that takes you to 3K. replacing bearings and internal motor work costing 1K or so? its not that bad of a price. the biggest factor is what they are doing to rebuild the A4. a stock rebuild shouldnt cost more than 1500 honestly.
yes he actually does...i talked to him the other day, he has about 5-6 guys who work for him, a machine shop, and tranny shop at his place also.....hes actually jammed up, he told me that he wouldnt be able to get to my car till the 2nd week of feb. hes got about 20 cars right now ahead of mine....
BRINGS ME TO THE PRESENT.......ive talked to the general manager at the shop who got the motor for me....explained to him its been less then 7 months since ive installed this motor...and the bottom end is coming out, he said since he knows me and ive gotten a good bit of work done at his shop he's going to work with me and work something out...its over warranty by 3k miles
i got the motor rebuild company out of him....very poor company....ill explain in another post...
BRINGS ME TO THE PRESENT.......ive talked to the general manager at the shop who got the motor for me....explained to him its been less then 7 months since ive installed this motor...and the bottom end is coming out, he said since he knows me and ive gotten a good bit of work done at his shop he's going to work with me and work something out...its over warranty by 3k miles
i got the motor rebuild company out of him....very poor company....ill explain in another post...
