i dont know what to say to that john i dont hate cops i was speeding i didnt relize that 100 in a gto feels like 65 in a firebird i admit it but im a good dude and usually will go out of my way to help a fellow tech member

Jacob im super duper cereal i have done quite a few header installs on these cars its not as bad as people make it seem maybe if there is anything you need like a extra set of jackstands tools floorjack let me know man i help ya in any way i can

 

thanks for the support i just wouldnt want you to drive that far to do that....

 

as we speak ups just got hear and dropped off my install kit for my rearend....now im good to go...time to get hold of mark...

 

i was speaking of the irony, you just got nailed with a huge ticket by a cop, now you are going to help a cop, just ironic that is all

 

cops dont bother me at all. its not his fault i was speeding i got that ticket helping a fellow former georgia tech member we had to go to the summit warehouse just south of atlanta go get intake gaskets to put his car back together before he leaved for reassignment in cali for the record professinal products typhoon intake is junk sounds good looks good wont seal to save your life maybe the new gaskets they are coming out with will take care of that

 

wow jacob you will have a totally different car next time we see it at the meet, isnt it nice to finally start gettin **** done

 

tints done....blacked out some lights....gears should be done....but my weekend is screwed this week fellas....they switched me squads which means im working opposite....ie i should have had off this weekend...but now im working 5 12hour days straight

 

yeah well i believe my a4 is toast i hope that its just the shift contol solenoid that its throwing a code for. i aint got the money to have one built at the moment if its not the solenoid i wont be going to the track of the meet. hell it wont shift from second to third damnit damnit all to hell

 

if you want to get it built around here youve got several options andy.....1. one of the guys around here might help you out....or 2. you can take it where i took mine....

 

hopefully its just the 2-3 solenoid i cant bear to think it could be the 3-4 clutches mark i may need your help buddy

 

Smitty's should be renamed SHITTY'S! Go to Rainbow on Cassat!
I also had pretty good luck with the guy up at Cool Customs for tinting my C4(he even did the whole windshield for me) GOT-TINT is his phone number
And Tony @ HP or Tracy @ Speedfab would be a great shop for actualy motor work/tuning

 

tracy's a bit costly....not sure what im gonna do about the exhaust once more do to the switching of schedules....and i got my tint done by a guy at rollin sound...nice guy...knows some of the people on here.....

mark's gotta get on gears.....

where did you come from?^^^ and where have you been?

 

So I guess your not coming over here this weekend? I told ya id help.

Working so late sucks man. I try and get as much sleep as possible.

Ill call you up tomorow

 

man i can never get hold of you now....

 

Start preparing for the 3-4 clutches dude.

 

the only problem with the clutches is that inside the pan and filter look fine yes i cut the old filter open. no debris nothing nasty looking on the magnet it looks just like when you service a perfectly working tranny for the first time. and it just wont shift to third it dont slip at all just wont shift i keep the tranny serviced and havent had any problems out of it trans fluid looks good no burnt smell no discoloration about 15k ago added a silverado pan and filter little bit deeper of a pan will hold an extra quart of so.

 

jacob you need to drive to mayport get ian to do it save you a couple hundred bux and for tuning go to torrie out at stage 6(unleashed tuning) he actually tunes joes tt gt

 

may i ask what software does he use to tune? and WTF is "unleashed tuning"
i'm sure there is a much "better" blue coller tuner on this board.

 

sct or hp tuners he tunes the tt gt. unleashed does all the domestic tuning for stage 6

 

I had Torrie do my Mach a few years ago. He just did my SS on 4/2. We did 6 dyno pulls and a tune. $299.