Opening for tech in Tampa Bay...
Opening for tech in Tampa Bay... POSIRTION IS FILLED! Thanks all that applied.
We are taking applications for a tech assistant. Must have good knowledge of LS based cars & light trucks. Duties will be assisting senior techs on builds & R&R as well as regular maintenance. This is a BEGINNER apprentice position & pay will be based on skill set. Call JP to interview: 813-628-0080
We are taking applications for a tech assistant. Must have good knowledge of LS based cars & light trucks. Duties will be assisting senior techs on builds & R&R as well as regular maintenance. This is a BEGINNER apprentice position & pay will be based on skill set. Call JP to interview: 813-628-0080
Last edited by TLewis4095; Jan 20, 2008 at 06:38 PM.
Trending Topics
This position could be filled be a very experianced tech also at the current senior tech wage as well.....we are slammed & after a minimum of 1 year as a full tech we send the candidate to Reher Morrision Engine building school in Houston, TX. Lot's of other perks as well!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Any incentives for relocating? Mapquest says 3 hours, 36 minutes and Total Est. Distance: 225.79 miles. What sort of wages are we talking? If you can't tell I'm seriously considering this.
Here are some pics of the shop you would work in:
We have some fabrication tools (small milling machine & lathe, metal stock bender, etc.) & I believe we are one of the best equipped LS performance shops in the state...and the only one with an enclosed climate controlled Dyno.
Teching In
Joined: Jan 2008
Posts: 49
Likes: 0
OMG!!!!! Why in gods name do I have to lvie in ******* Iowa?!?!?!? I was just talking about something like this today to a buddy of mine, getting into an LS based shop, even if it was sweeping the floors or answering phones! DAMNIT