Tnt Results!!!

Reply Subscribe

Thread Tools

Search this Thread

Oct 11, 2008 | 08:25 PM

#21

HUNTER02SS

Thread Starter

9 Second Club

iTrader: (24)

Joined: Oct 2006

Posts: 2,796

Likes: 1

From: Kennesaw, Georgia

Quote:

Originally Posted by sevanseriesta

I knew it was not good when I saw TNT in your topic..... Wish you would have got to run them a little longer however. This was on the 370 motor right. Are you going more CI for the next one? What RPM were you seeing full boost? I actually have a ton of questions I may just PM you!

You can pm me. I was at full boost around 5500rpm. That part hasn't changed from the smaller turbo's. I had to go up on the 2 step rpm though to build boost! As far as more ci, I will probably not go more than a 402, and that will only because i will upgrade to a stronger crank.

Oct 12, 2008 | 03:53 PM

#22

Beaflag VonRathburg

OWN3D BY MY PROF!

iTrader: (176)

Joined: Feb 2006

Posts: 9,146

Likes: 3

From: Jax Beach, Florida

Most rods have a buffer built into them that they don't advertise. Obviously passed that buffer on the new setup, but it might have been a little / right on the edge before.

Pictures of the carnage?

Oct 12, 2008 | 05:13 PM

#23

otherwhitemeat

TECH Resident

iTrader: (3)

Joined: Oct 2006

Posts: 758

Likes: 1

Rods don't just let go....usually detonation is involved.

Oct 12, 2008 | 05:15 PM

#24

Jimmy P

TECH Fanatic

iTrader: (177)

Joined: Jan 2004

Posts: 1,933

Likes: 1

From: USA

How high where you spinning the motor? I have Scat rods in my car too..

Did you have the ARP2000 rod bolts?

Oct 12, 2008 | 05:25 PM

#25

HUNTER02SS

Thread Starter

9 Second Club

iTrader: (24)

Joined: Oct 2006

Posts: 2,796

Likes: 1

From: Kennesaw, Georgia

Quote:

Originally Posted by otherwhitemeat

Rods don't just let go....usually detonation is involved.

No detonation. 11.3 A/F with 15 degree's of timing and C16 race fuel.
This rod just let go! The data log was fine and then it boom!

Oct 12, 2008 | 05:26 PM

#26

HUNTER02SS

Thread Starter

9 Second Club

iTrader: (24)

Joined: Oct 2006

Posts: 2,796

Likes: 1

From: Kennesaw, Georgia

Quote:

Originally Posted by Jimmy P

How high where you spinning the motor? I have Scat rods in my car too..

Did you have the ARP2000 rod bolts?

7000rpm! Yes arp rod bolts!

Oct 12, 2008 | 07:06 PM

#27

onfire

Coal Mining Director

iTrader: (17)

Joined: Nov 2001

Posts: 4,442

Likes: 0

From: Virginia

0.96 AR turbines? How much boost at the hit? How much rpm at the hit?

My 76's have 0.81 turbines and make 7psi at 3750rpm and 9psi at 4000rpm.

Oct 12, 2008 | 07:10 PM

#28

John02SS

10 Second Club

iTrader: (47)

Joined: Nov 2001

Posts: 1,452

Likes: 0

From: Pace, FL

Damn, you didn't have to blow it up to keep from getting skinned by the Notch! LOL We tested Brads Friday night, went 5.69 at 126 on 15 lbs, pump gas, and meth. Gonna turn it up to 22 lbs and C16 for MMP. You still coming to hang out? Should be a good group. I"ll buy the first Bud Light!