need help with IC choice

Reply Subscribe

Thread Tools

Search this Thread

Feb 28, 2009 | 04:24 PM

94dragbird

Thread Starter

TECH Apprentice

iTrader: (6)

Joined: Jul 2008

Posts: 340

Likes: 0

From: Ottumwa, IA

need help with IC choice

I know a lot of you are running ls1 and I'm running an lt1 but I need a good air to water intercooler and ideas for mounting location. Setup is a 383 with header hotparts and a PT88.

Mar 1, 2009 | 04:53 PM

94dragbird

Thread Starter

TECH Apprentice

iTrader: (6)

Joined: Jul 2008

Posts: 340

Likes: 0

From: Ottumwa, IA

Can you guys at least point me in the right direction? Maybe recommend a manufacturer?

Mar 1, 2009 | 04:57 PM

98Z28CobraKiller

Restricted User

iTrader: (17)

Joined: Nov 2005

Posts: 5,783

Likes: 5

From: WPB, FL

I know that LOTS of guys run these
http://www.precisionturbo.net/Wc21d17e349ccf.htm

Can't really help you on sizing as I don't have any experience with this stuff.

Mar 1, 2009 | 04:57 PM

AFASTYZFR1

10 Second Club

iTrader: (55)

Joined: Feb 2007

Posts: 1,746

Likes: 2

From: Florida

If I knew anything about air to water I would help........maybe contact Exotic Performance

Mar 1, 2009 | 05:41 PM

crf538

Launching!

iTrader: (3)

Joined: Jun 2008

Posts: 234

Likes: 0

From: richmond, va

ive got some junk i got off ebay for 250 bucks on my car, i figured if that didnt work well i would get the precision like a lot of others have. Mine's mounted in front of the left front wheel so the inlet is behind of the radiator support and the outlet is in front of it ( pretty standard, a lot of people mount them there) ive only had boost up to 7.5 pounds but so far its worked well.

https://ls1tech.com/forums/forced-in...uild-pics.html

Last edited by crf538; Mar 1, 2009 at 05:43 PM. Reason: .