a few turbo build pics
#1
Launching!
Thread Starter
iTrader: (3)
Join Date: Jun 2008
Location: richmond, va
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
*MORE PICS ADDED DOWN THE PAGE
heres a couple pics of my finished turbo build. its set up like the tti race kit (the crossover is tti, i picked it up from mightymouse) the cold side is 3 inch with an air to water ic and a water resivior where the battery used to be. i'll try to get some pictures of the bottom side where all the good stuff is next time i lift it up
heres a couple pics of my finished turbo build. its set up like the tti race kit (the crossover is tti, i picked it up from mightymouse) the cold side is 3 inch with an air to water ic and a water resivior where the battery used to be. i'll try to get some pictures of the bottom side where all the good stuff is next time i lift it up
Last edited by crf538; 10-22-2009 at 07:20 PM. Reason: added pics
Trending Topics
#8
Launching!
Thread Starter
iTrader: (3)
Join Date: Jun 2008
Location: richmond, va
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
heres a few more pics of the underside i took tonight, they are kinda blurry but i didnt notice till i got back home.
thanks for all the positive comments, i never woulda got this thing put together if not for reading stuff in this forum endlessly
right now ive got the tune pretty good on the 3.5 pound spring ( makes 4.2 pounds) so i guess its about time to explore the functionality of this here ebooster2
thanks for all the positive comments, i never woulda got this thing put together if not for reading stuff in this forum endlessly
right now ive got the tune pretty good on the 3.5 pound spring ( makes 4.2 pounds) so i guess its about time to explore the functionality of this here ebooster2
![Secret2](https://ls1tech.com/forums/images/smilies/LS1Tech/secret.gif)
#14
Launching!
Thread Starter
iTrader: (3)
Join Date: Jun 2008
Location: richmond, va
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
dont assume it looks too good, thats why i took blurry pictures haha....just dont try and race me, i saw your dyno videos floating around..im pretty sure im 100 hp short
#16
Launching!
Thread Starter
iTrader: (3)
Join Date: Jun 2008
Location: richmond, va
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
so for a quick update
monday i dropped the trans off to get built (4l80e) and ordered a PY3400, when i got back i turned the boost up to 7 psi and something came loose in the rear from a 30 mph roll...must have been already broken from a while back or something cause im not making much power right now. anyway 1-800-midwest it was....man it sucks to have to replace everything from the flexplate back at once
....im eating ramen for at least a year, and i have a few good kidneys if anyone needs one.
monday i dropped the trans off to get built (4l80e) and ordered a PY3400, when i got back i turned the boost up to 7 psi and something came loose in the rear from a 30 mph roll...must have been already broken from a while back or something cause im not making much power right now. anyway 1-800-midwest it was....man it sucks to have to replace everything from the flexplate back at once
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)