Oil Pump For a 370?

Reply Subscribe

Thread Tools

Search this Thread

Mar 16, 2009 | 09:33 PM

ForcedFeed370

Thread Starter

Teching In

iTrader: (1)

Joined: Jun 2008

Posts: 10

Likes: 0

From: Los Angeles, Ca

Oil Pump For a 370?

Will my old ported LS6 oil pump be enough for my forged 370? I usto see 20-25 psi hot on my stock cammed ls1. Im not sure if its enough for my 370 and turbo. Any suggestions?

Mar 16, 2009 | 09:52 PM

OUTLAWZ RACING

TECH Addict

iTrader: (9)

Joined: Mar 2004

Posts: 2,726

Likes: 1

From: COLUMBUS GA.

I run a stock ls6 pump with the brown bypass spring

Mar 16, 2009 | 10:25 PM

ForcedFeed370

Thread Starter

Teching In

iTrader: (1)

Joined: Jun 2008

Posts: 10

Likes: 0

From: Los Angeles, Ca

Quote:

Originally Posted by OUTLAWZ RACING

I run a stock ls6 pump with the brown bypass spring

Where do i get the springs? I don't think i ever got any with the pump.

Mar 16, 2009 | 10:39 PM

Turbo 6.0

TECH Regular

Joined: Nov 2006

Posts: 466

Likes: 0

I did some light porting on a LS6 pump and then shimmed the spring with some #10 washers (I think 3) and I run at leasty 30 psi at idle hot.

Mar 16, 2009 | 10:41 PM

ForcedFeed370

Thread Starter

Teching In

iTrader: (1)

Joined: Jun 2008

Posts: 10

Likes: 0

From: Los Angeles, Ca

I checked and I have a purpule spring in there. Will the brown spring create more pressure?

Mar 17, 2009 | 11:47 AM

ForcedFeed370

Thread Starter

Teching In

iTrader: (1)

Joined: Jun 2008

Posts: 10

Likes: 0

From: Los Angeles, Ca

Anyone?

Mar 17, 2009 | 08:20 PM

OUTLAWZ RACING

TECH Addict

iTrader: (9)

Joined: Mar 2004

Posts: 2,726

Likes: 1

From: COLUMBUS GA.

The pump should have two springs that came with it. One in side installed and one loose. The one installed is the lower bypass pressure. the one that is loose is the higher. Call slp they can help.

Trending Topics

60-130 Dragy runs?

20

465
LS3 will not run

21

487
FI Tech engine management system.......anyone use it?

8

110
Car covers

11

670
New to me '04

18

371

Mar 17, 2009 | 10:09 PM

ForcedFeed370

Thread Starter

Teching In

iTrader: (1)

Joined: Jun 2008

Posts: 10

Likes: 0

From: Los Angeles, Ca

Quote:

Originally Posted by OUTLAWZ RACING

The pump should have two springs that came with it. One in side installed and one loose. The one installed is the lower bypass pressure. the one that is loose is the higher. Call slp they can help.

Do you know if they are purchaseable? I think the one that it has now is low bypass pressure because my car would only see 30-35 psi cold and 20-25 psi hot. I need more pressure because of the turbo now having to feed off my pressure.