pusher fans
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
thats odd, I would not have expected you to be overheating on stock pump and aftermarket radiator. I know its a basic question, but are you sure you have the fan operating at full speed, and wired correctly? I've seen some posts where guys wire them incorrectly, and the fan only works at about 50% effeciency.
Joined: Nov 2001
Posts: 8,484
Likes: 0
From: Cecil County Raceway!!!
thats odd, I would not have expected you to be overheating on stock pump and aftermarket radiator. I know its a basic question, but are you sure you have the fan operating at full speed, and wired correctly? I've seen some posts where guys wire them incorrectly, and the fan only works at about 50% effeciency.
great point...i run a puller and a 12inch pusher. im thinking i will make a shroud custom for my setup. i hear that a shroud help a ton. anyone try this?
You are running a pusher fan AND A puller and you are overheating? Sounds like something in your cooling system(lines running to radiator, air in lines, stock WP taking a crap on you) is wrong. That's more than enough CFM movement.
I have 2 12" reversible puller fans and I have them set up as pushers and switched the blade around and I can't keep my car cool. As soon as you get up to cruising speed the temps steadily drop though. I use the stock wiring also.
Who has had luck with dual pusher fans, what temp do you normally not go over, and whats your brand/part number?
Who has had luck with dual pusher fans, what temp do you normally not go over, and whats your brand/part number?
