installed meth inj.? some opinions needed

Reply Subscribe

Thread Tools

Search this Thread

Mar 17, 2009 | 11:58 AM

500@10psi

Thread Starter

On The Tree

iTrader: (5)

Joined: Oct 2006

Posts: 176

Likes: 7

From: oh.

installed meth inj.? some opinions needed

im doing a diy meth injection, and i wanted to know where some other people have put theyre injector. i have a twin intercooler procharger setup and i was thinking i could put it on the bottom side of the collector box. in your opinion is that a good place? the only thing i was worried about was having it before the maf have some of you out there had any ill experiences putting it there? any input is welcome and appriciated

Mar 17, 2009 | 12:01 PM

allthrotle

TECH Resident

iTrader: (2)

Joined: Jul 2005

Posts: 919

Likes: 0

From: Sparks,NV

Mine is drilled and tapped into my throttle body.

Mar 17, 2009 | 06:10 PM

98catfish

TECH Regular

iTrader: (13)

Joined: Nov 2006

Posts: 416

Likes: 0

it will do better closer to the tbody.
I wouldnt be comfortable spraying through maf.

Mar 17, 2009 | 06:37 PM

shawn_c992001

Launching!

Joined: Jul 2005

Posts: 263

Likes: 0

From: Arnett WV

It will cause problems if sprayed on the MAF sensor.

Mar 17, 2009 | 07:41 PM

'Trust'

10 Second Club

iTrader: (24)

Joined: Aug 2004

Posts: 7,972

Likes: 4

From: Eternity

Mine is mounted to the front of the plenum.

EDIT: Then again, I have no MAF.

Last edited by 'Trust'; Mar 17, 2009 at 08:35 PM.

Mar 17, 2009 | 08:10 PM

500@10psi

Thread Starter

On The Tree

iTrader: (5)

Joined: Oct 2006

Posts: 176

Likes: 7

From: oh.

so 4 of 4 say after the maf ..... i have an extra tb laying around i suppose i will experiment on that on and see where the best location for me will be thanks for you input everyone if this works out i will post the parts and where to buy the stuff needed for the DIY meth kit that has costed me 30 dollars so far

Mar 17, 2009 | 08:40 PM

HotRod68Camaro

12 Second Club

iTrader: (29)

Joined: Dec 2003

Posts: 983

Likes: 0

From: San Antonio, TX

run it after the MAF, but before an Air Temp sensor. that way you can take advantage of the cooler air. Then if the system failed or ran out of meth for any reason it would notice the rise in air temp and it could pull timing