My Procharged TA is done.
I am actually surprised myself. The dyno is a accurate. There have been a lot of cars on it. My buddy who is good at tuning and did my whole car has done a bunch of vehicles on it and mine is a freak. He is amazed himself. I have 70k on the motor. When it was apart to put the rod bolts were in. The motor looks like brand new. Looks like there is hardly any wear on it. Just for fun I think I am going to throw it on another mustang dyno and do it on the same night with the conditions mine were done in.
Last edited by josepy121380; May 23, 2009 at 11:35 PM.
TECH Fanatic
Joined: Jun 2003
Posts: 1,869
Likes: 99
According to the chart rwhp is actually 575 but adjusted with "with WCF" raising it to 610 - a 35 hp difference. What does 'with WCF' mean?
But 575 seems to be high for a P1 too. We don't know what pulley combination either and if it is a six rib or 8 rib or 3 1/2 or 4 1/2 inch intercoolers?
If true HP actually is 610 then on a Dynojet that equates to almost 700 rwhp if there is a true 15-20 percent differential between a Mustang and Dynojet.
I surely wouldn't want to be running that much hp with a stock bottom end and without meth assist to cool the intake charge.
It is a six speed so that might account for some of the difference.
But 575 seems to be high for a P1 too. We don't know what pulley combination either and if it is a six rib or 8 rib or 3 1/2 or 4 1/2 inch intercoolers?
If true HP actually is 610 then on a Dynojet that equates to almost 700 rwhp if there is a true 15-20 percent differential between a Mustang and Dynojet.
I surely wouldn't want to be running that much hp with a stock bottom end and without meth assist to cool the intake charge.
It is a six speed so that might account for some of the difference.
According to the chart rwhp is actually 575 but adjusted with "with WCF" raising it to 610 - a 35 hp difference. What does 'with WCF' mean?
But 575 seems to be high for a P1 too. We don't know what pulley combination either and if it is a six rib or 8 rib or 3 1/2 or 4 1/2 inch intercoolers?
If true HP actually is 610 then on a Dynojet that equates to almost 700 rwhp if there is a true 15-20 percent differential between a Mustang and Dynojet.
I surely wouldn't want to be running that much hp with a stock bottom end and without meth assist to cool the intake charge.
It is a six speed so that might account for some of the difference.
But 575 seems to be high for a P1 too. We don't know what pulley combination either and if it is a six rib or 8 rib or 3 1/2 or 4 1/2 inch intercoolers?
If true HP actually is 610 then on a Dynojet that equates to almost 700 rwhp if there is a true 15-20 percent differential between a Mustang and Dynojet.
I surely wouldn't want to be running that much hp with a stock bottom end and without meth assist to cool the intake charge.
It is a six speed so that might account for some of the difference.
I dont know what else to say.
TECH Apprentice
Joined: Jul 2003
Posts: 346
Likes: 0
From: Raleigh, NC
Part of the reason why this car is pushing so hard is due to the upgraded fuel system. The procharger systems yield large gains with larger injector and fuel delivery; even with stock heads and intake.
I was over budget on the project and I dont want to be slinging a new motor in it.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
