turbo guys in here need help
06-23-2009, 05:11 PM
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Oct 2008
Location: Virginia!!!!
Posts: 1,685
Likes: 0
Received 0 Likes
on
0 Posts
turbo guys in here need help I'm building a kit using truck manifolds on my silverado. I need to buy a downpipe and crossover. I don't need stainless. Maybe just mild steel. Someone lemme know a good place to buy
06-23-2009, 07:11 PM
#2
On The Tree
Join Date: Feb 2009
Location: Rhode Island. (new hampshire)
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
are you making your own pipes? Rear mount? Front mount?
I used Jegs Universal Exhaust Piping kit. only like 225$, and you get Four U bends, 4 45* bends, 4 90* bends, and four 4' straight sections of pipe.
Mine was aluminized steel (basically the same as Mild Steel) Free shipping too.
Oh, and this was for 2.5" diameter. Good for piping from headers to turbo, and charge pipes. For a downpipe, you'd want 3" +
For other types of piping, Check out Ace Stainless.com or Mandrel-bends.com
Mandrel-bends.com has an Ultimate Builder Kit... For two of their kits, you'd still be spending less than the Jegs kit. Wish i knew that when i ordered my ****.
I used Jegs Universal Exhaust Piping kit. only like 225$, and you get Four U bends, 4 45* bends, 4 90* bends, and four 4' straight sections of pipe.
Mine was aluminized steel (basically the same as Mild Steel) Free shipping too.
Oh, and this was for 2.5" diameter. Good for piping from headers to turbo, and charge pipes. For a downpipe, you'd want 3" +
For other types of piping, Check out Ace Stainless.com or Mandrel-bends.com
Mandrel-bends.com has an Ultimate Builder Kit... For two of their kits, you'd still be spending less than the Jegs kit. Wish i knew that when i ordered my ****.
