LS1 edit ?'s ditching the maf and using a 2bar
TECH Apprentice
Joined: Apr 2002
Posts: 308
Likes: 0
From: Austin, TX
Originally Posted by y2khawk
The curve on the plastic MAF's is slightly shallower, IE hits the max frequency at a lower flow. The metal MAF's will get to the 512 limit before 12kHz.
a decent guesstimate using the coversion from g/s to lb/min and the 10 HP/lb/min generalization at peak power
100 g/s = 130 FLYWHEEL HP
That's assuming an unmolested MAF, it's been VERY accurate for me.
So in theory, you should be able to accurately fuel up to 660 or so FWHP.
a decent guesstimate using the coversion from g/s to lb/min and the 10 HP/lb/min generalization at peak power
100 g/s = 130 FLYWHEEL HP
That's assuming an unmolested MAF, it's been VERY accurate for me.
So in theory, you should be able to accurately fuel up to 660 or so FWHP.
So where do you get these metal MAFs you are referring to? Are they from older ls1s or aftermarket.
PSJ, are there any links on the net about the TCI solution. I sent an email to Mack to see what he has on it.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
