When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If i use a 4.1 crank and 6.125 rod sizeand hone my 6L cast iron block to minimal clean up , could i boost it with a vortech and be safe.Or would the stroke pull the piston to far down in the bore.
Don't do it. It pushes the wrist pin too high in the piston as well as brings the piston down too far in the bore. Not recommended for anything but N/A engines. Just turn the boost up another pound.