Forced Induction Superchargers | Turbochargers | Intercoolers

Michigan Engine Builders?

Thread Tools
 
Search this Thread
 
Old 10-08-2009 | 11:15 PM
  #1  
supercatxr7's Avatar
Thread Starter
TECH Enthusiast

iTrader: (5)
 
Joined: Aug 2007
Posts: 628
Likes: 2
Default Michigan Engine Builders?

I'm looking for someone in Michigan to build me a forged motor for my 06 Monte Carlo SS 5.3 LS4 front wheel drive. Obviously someone that some of you have utilized and have been happy with the work.

Car is currently running a Cartuning turbo kit as shown in sig below on stock motor. My plan is bore to 3.90", Diamond forged pistons, Callies Compstar H beam rods, LS6 intake manifold, ported heads, LS6 cam or turbo grind. Current Turbo is a T66, intercooled, and also running methanol injection. I will step up to a T72 for the new motor and hope to make 600-650hp. We estimate I'm making somewhere around 450 or so now.

Any recommendations on a builder?
Old 10-08-2009 | 11:21 PM
  #2  
Haans249's Avatar
TECH Addict

iTrader: (24)
 
Joined: May 2005
Posts: 2,045
Likes: 4
From: Fort Worth, TX
Default

Billy Briggs is probably your best bet. He is quite busy though.
Old 10-09-2009 | 04:00 AM
  #3  
EPP's Avatar
EPP
FormerVendor
iTrader: (22)
 
Joined: Mar 2003
Posts: 13,063
Likes: 2
Default

Bring it over to us in Indiana, we're not too far from the Michigan border. Bob
Old 10-09-2009 | 06:46 AM
  #4  
98transguy's Avatar
TECH Enthusiast

iTrader: (7)
 
Joined: Feb 2005
Posts: 735
Likes: 0
From: new hudson,mi
Default

yes exotic performance plus is only 2 1/2 hr's from south east michigan , thats who built my motor Bob and all of the guys over there do a great job and very happy with my motor they did for me
Old 10-09-2009 | 07:16 AM
  #5  
hellbents10's Avatar
LS1Tech Sponsor

iTrader: (10)
 
Joined: Mar 2004
Posts: 4,439
Likes: 3
From: Spring Lake, MI
Default

We can handle that too, we are located in West Michigan.
Old 10-09-2009 | 09:50 AM
  #6  
Haans249's Avatar
TECH Addict

iTrader: (24)
 
Joined: May 2005
Posts: 2,045
Likes: 4
From: Fort Worth, TX
Default

Billy had a hand in building the motor that went 6.86 in 'Casper'

Here is the article: http://www.hotrod.com/featuredvehicl...aro/index.html

He is right in the Detroit area.
Old 10-09-2009 | 10:19 AM
  #7  
Shearer's Avatar
Launching!

 
Joined: Oct 2005
Posts: 240
Likes: 0
From: Northern Chicago
Default

Kurt Urban is up in Michigan as well...
Old 10-09-2009 | 11:03 AM
  #8  
nuclearxp's Avatar
Staging Lane
 
Joined: Jul 2008
Posts: 51
Likes: 0
Default

I second the previous sections. Might be useful to call Livernois Motorsports - they'll definately know.
Old 10-09-2009 | 11:30 AM
  #9  
onfire's Avatar
Coal Mining Director
iTrader: (17)
 
Joined: Nov 2001
Posts: 4,442
Likes: 0
From: Virginia
Default

http://www.kurturbanperformance.com/

One of the best in the country.
Old 10-09-2009 | 12:22 PM
  #10  
Haans249's Avatar
TECH Addict

iTrader: (24)
 
Joined: May 2005
Posts: 2,045
Likes: 4
From: Fort Worth, TX
Default

Kurt Urban is a good choice as well.
Old 10-09-2009 | 12:40 PM
  #11  
supercatxr7's Avatar
Thread Starter
TECH Enthusiast

iTrader: (5)
 
Joined: Aug 2007
Posts: 628
Likes: 2
Default

Thanks for the replies. I'll be doing some research and getting quotes.
Old 10-14-2009 | 11:55 AM
  #12  
stanboyd89's Avatar
Teching In
 
Joined: Sep 2006
Posts: 8
Likes: 0
Default

Tried to PM you back but your mail box if full.
Old 10-15-2009 | 08:40 AM
  #13  
supercatxr7's Avatar
Thread Starter
TECH Enthusiast

iTrader: (5)
 
Joined: Aug 2007
Posts: 628
Likes: 2
Default

PM box now open!
Old 10-15-2009 | 09:50 AM
  #14  
FastKat's Avatar
TECH Addict

iTrader: (10)
 
Joined: May 2005
Posts: 2,487
Likes: 2
From: Pittsburgh, PA
Default

If you're in Michigan, you have a lot of REALLY good options. I don't think you can go wrong with anybody posted to this thread.
Old 12-18-2009 | 11:22 PM
  #15  
supercatxr7's Avatar
Thread Starter
TECH Enthusiast

iTrader: (5)
 
Joined: Aug 2007
Posts: 628
Likes: 2
Default

Thanks for all the replies! I met with TJ today at Baker Engineered Racing Engines (HellBentS10) and am having them do the motor for me.
Old 12-19-2009 | 12:15 AM
  #16  
WHPLASH's Avatar
10 Second Club
iTrader: (22)
 
Joined: Dec 2003
Posts: 1,182
Likes: 0
From: Macomb Michigan
Default

Originally Posted by nuclearxp
I second the previous sections. Might be useful to call Livernois Motorsports - they'll definately know.
Bob at Exotic is the man. Livernois, open your wallet.

Been there done that. Exotic has a great reputation for a long time.

From one Michigander to another.
Old 12-19-2009 | 12:11 PM
  #17  
unit213's Avatar
Administrator

 
Joined: Jan 2002
Posts: 45,841
Likes: 5
From: Earth
Default

Livernois.
Old 12-20-2009 | 12:10 AM
  #18  
WHPLASH's Avatar
10 Second Club
iTrader: (22)
 
Joined: Dec 2003
Posts: 1,182
Likes: 0
From: Macomb Michigan
Default

Originally Posted by unit213
Livernois.
UNIT has $$$!!! LMFAO
Old 12-21-2009 | 09:45 AM
  #19  
unit213's Avatar
Administrator

 
Joined: Jan 2002
Posts: 45,841
Likes: 5
From: Earth
Default

Originally Posted by WHPLASH
UNIT has $$$!!! LMFAO
I just like to do it right the first time.



Quick Reply: Michigan Engine Builders?



All times are GMT -5. The time now is 06:55 PM.