Couple of FI questions
Thread Starter
10 Second Club
iTrader: (199)
Joined: Nov 2001
Posts: 1,493
Likes: 4
From: Hampton Va
Couple of FI questions I'm about to install a maggie 112 on my camaro and need to know which parts would work the best.
I have 2 converters the first being a Yank SS4400 currently in the car or a Yank ST3500 which I use to run oint he car.
The other question regards a cam I bought its a crane z series 224/224 .551/,551 114 is this a okay cam to run with the maggie or would the stock cam in the car work better.
Current combo is a stock motor with bolt ons and the SS4400 and runs 11.39-11.6 depending on weather. Looking to run 10.5x or better if possible.
I have 2 converters the first being a Yank SS4400 currently in the car or a Yank ST3500 which I use to run oint he car.
The other question regards a cam I bought its a crane z series 224/224 .551/,551 114 is this a okay cam to run with the maggie or would the stock cam in the car work better.
Current combo is a stock motor with bolt ons and the SS4400 and runs 11.39-11.6 depending on weather. Looking to run 10.5x or better if possible.
You posted on a Friday night, most go out, then early in the a.m. on Saturday complaining nobody posted? 4400 is too big for FI IMO, go with the ST3500. I have a 3400 in mine, and it did have a 3200. That cam also has -4* of overlap, probably not ideal, but I'm not an expert.
