Plans for Catch Can Setup
11-12-2009, 08:56 AM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Virginia
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Plans for Catch Can Setup I know most of you are just going to tell me to read the 11 page thread on everyone's advice on catch cans. Well all I can say is been there, done that and it made my head hurt. Here is my plan for my catch can setup, any questions or complaints are welcome. I'm open to criticism.
I bought an Allstar catch can with 2 10AN fittings and a breather on top.
I also bought a set of aftermarket fabbed aluminum valve covers that will have a 10AN bung on top of both. The braided hose from the valve covers will meet in a "T" fitting and go into one of the ports on the catch can. I will be getting someone to put another 10An fitting in my edelbrock valley cover and a braided hose will run from that to the other port on the catch can. Everything else will be plugged. Let me know your opinions. Thanks guys.
I bought an Allstar catch can with 2 10AN fittings and a breather on top.
I also bought a set of aftermarket fabbed aluminum valve covers that will have a 10AN bung on top of both. The braided hose from the valve covers will meet in a "T" fitting and go into one of the ports on the catch can. I will be getting someone to put another 10An fitting in my edelbrock valley cover and a braided hose will run from that to the other port on the catch can. Everything else will be plugged. Let me know your opinions. Thanks guys.
