need turbo info
need turbo info I currently am in possession of a Garrett turbo and need some more info on it.
The metal tag has a part number 409750 and four other numbers that are hard to read. I got this turbo from a buddy that owed me money and I am not sure what application i could use it on or ho much it is worth.
Some things I know about this turbo. It has a T6 flange and I am told it is a T18A90.
I have pics here for you
The metal tag has a part number 409750 and four other numbers that are hard to read. I got this turbo from a buddy that owed me money and I am not sure what application i could use it on or ho much it is worth.
Some things I know about this turbo. It has a T6 flange and I am told it is a T18A90.
I have pics here for you
that my friend is a big *** turbo, and is probably worth 1200 bucks. and my guess is it is capable of somewhere around 800 hp or more. You better be building like a 400+ cubed forged motor. and my other guess is its probably a diesel turbo from the quick search i just did.
http://www.turbomaster.info/eng/appl...etroit+diesel/
http://www.powertechnologies-turbo.c...ochargers.html
google is nice.
http://www.turbomaster.info/eng/appl...etroit+diesel/
http://www.powertechnologies-turbo.c...ochargers.html
google is nice.
Teching In
Joined: Dec 2008
Posts: 3
Likes: 0
From: Dallas-Fort Worth
It's 1 of four T18A90's off a 16V92TA, 1472C.I, V-16 Detroit Diesel. Compressor wheel is 91.1x127.0mm and the turbine wheel is 129.5x106.2mm. Depending on what that last 4 numbers are that you say you can't read it should have a 1.50A/R or a 1.32 exhaust.
Good score. Same turbo aftermarket places make some of their 91mm's out of
Good score. Same turbo aftermarket places make some of their 91mm's out of
Last edited by turbodave; Jan 12, 2010 at 08:06 AM.
It's 1 of four T18A90's off a 16V92TA, 1472C.I, V-16 Detroit Diesel. Compressor wheel is 91.1x127.0mm and the turbine wheel is 129.5x106.2mm. Depending on what that last 4 numbers are that you say you can't read it should have a 1.50A/R or a 1.32 exhaust.
Good score. Same turbo aftermarket places make some of their 91mm's out of
Good score. Same turbo aftermarket places make some of their 91mm's out of
"this is a big *** turbo for a big *** motor and very very capable of big *** power"
Trending Topics
It's 1 of four T18A90's off a 16V92TA, 1472C.I, V-16 Detroit Diesel. Compressor wheel is 91.1x127.0mm and the turbine wheel is 129.5x106.2mm. Depending on what that last 4 numbers are that you say you can't read it should have a 1.50A/R or a 1.32 exhaust.
Good score. Same turbo aftermarket places make some of their 91mm's out of
Good score. Same turbo aftermarket places make some of their 91mm's out of
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo Well, the next question I have is; what is the going value for one of these?
I am looking for a smaller turbo and a set of 317 heads. I definitely do not need this big of a turbo. I am only looking for around 600hp.
I am looking for a smaller turbo and a set of 317 heads. I definitely do not need this big of a turbo. I am only looking for around 600hp.
