corpserodeo666

iTrader: (12)

I have pretty much the same setup in mine. I have a Rossler 4l80e with a Precision 3400 stall and Manual Shift. The car runs 9's and drives on the street no problem. You made the right choice with a 4l80e for street driving.

lmt0705

iTrader: (7)

hope so, cant wait to try that transbrake!

corpserodeo666

iTrader: (12)

You'll love it. I thought it was going to be a PITA at first but it's awesome. I hope you like it also!

lmt0705

iTrader: (7)

whats your setup?

corpserodeo666

iTrader: (12)

HKE Built 408
TFS 225cc Heads
8.5.1 Comp. Ratio
Nasty Performance Fuel System
120lb Injectors
APS Turbo kit (for sale trying to go Procharged)
Rossler 4l80e with Trans Brake
Ford 9 with strange center section and 31 spline axles
Full suspension

And lots of stuff I can't remember if you would like to know more PM me I'll dig up the rest.

blown99bergerssclone

iTrader: (13)

here is what is going in mine...not cheap but you get what you pay for.

tci part numbers

272500 4l80 w rmvb and tb
242940 billet converter
611641 outlaw shifter with 2 buttons
618018 reverse patern plate

i am shopping prices right now and ordering in the next few weeks but so far total is 4771.10 including drop ship from tci.

i have done quite a bit of research and this is the combination i have come up with to put behind my forged 8:5:1 dart headed procharged juiced powerplant. of the juice 15 lbs expecting.....pretty good on the juice another 100 out of the hole .

lmt0705

iTrader: (7)

your really going to want the aluminum drum and 300m shafts, not sure what that build includes but if it doesent have those parts I would be looking elsewhere for a tranny. there are some great builders on this site check them out. your better off spending a little more now and never having to worry about it then breaking it and having to start over again