Looking for a good cam.....
Looking for a good cam..... Motor specs are ls1 stock lower end 6.0 manifolds vic jr with elbow 317s patriot golds MP T70 at 10lbs. I'm kind of lost looking for a good cam to with this combo. I want to make peak power at 6200-6400 I was looking at the Virgina speed cams and speed inc, is there any other ones out there that are good. Trying to make 550-600 rwhp.
Launching!
Joined: Jul 2008
Posts: 249
Likes: 0
From: cookeville, tn
Motor specs are ls1 stock lower end 6.0 manifolds vic jr with elbow 317s patriot golds MP T70 at 10lbs. I'm kind of lost looking for a good cam to with this combo. I want to make peak power at 6200-6400 I was looking at the Virgina speed cams and speed inc, is there any other ones out there that are good. Trying to make 550-600 rwhp.
Motor specs are ls1 stock lower end 6.0 manifolds vic jr with elbow 317s patriot golds MP T70 at 10lbs. I'm kind of lost looking for a good cam to with this combo. I want to make peak power at 6200-6400 I was looking at the Virgina speed cams and speed inc, is there any other ones out there that are good. Trying to make 550-600 rwhp.
http://shop.brutespeed.com/Brute-Spe...n-Camshaft.htm
This cam will give the car a great sounding idle, plus it will give you a large increase in power. Bob
This cam will give the car a great sounding idle, plus it will give you a large increase in power. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
You should go to an LS6 intake. At that power level and with your desired peak power RPM, that victor is just hurting your throttle response and spool, not that it'll take much to spool that turbo. Then put an LS6 cam and springs and you're done.
