danbap

iTrader: (6)

does any one else make a surge valve besides procharger? i need a valve that is open when not in boost. i ran a bov on my last setup and it was fine but I'm having some problems with fuel pressure creep. so i put a pro flow on there now but looking for something a Little nicer. but i cant pull the trigger on a $400 race valve.

danbap

iTrader: (6)

no one makes one?

MR2liter

iTrader: (11)

I am running a tial Q.

Bob@BruteSpeed

iTrader: (16)

Vortech has one. Bob

danbap

iTrader: (6)

thanks, looks like I'm still going to be going with the procharger one. vortech doesn't seem to work well above 10psi. bob just want to make sure the race valve is open when not in boost correct? just like the pro surge valve?

Bob@BruteSpeed

iTrader: (16)

Correct, boost doesn't enter the engine until the valve sees near zero vacuum.
http://shop.brutespeed.com/ATI-ProCh...sories_c18.htm I sell them at this link. Bob

danbap

iTrader: (6)

ok thanks bob, i have a normal BOV and with the air always getting pumped in the manifold i had a problem with my fuel pressure regulator.

i should be ordering one later this week.