narx66gmc

thanks for the new screensaver!! great looking project....

Spoolin

iTrader: (8)

Here's a pic of the Magazine cover...





And here's a little write up and video clip from Truckin's web site...

http://www.truckinweb.com/features/1...ado/index.html

364HC

iTrader: (3)

that is one good looking truck.

Spoolin

iTrader: (8)

Thanks guys. Just found out the truck's been running on 7 possible 6 cylinders because of a loose plug wire!!
Should be getting the truck back this week from the tuners...fingers crossed.

Spoolin

iTrader: (8)

So my tuner called me at 3pm and told me that they had the truck up on the rollers and they were currently making 668rwhp / 637rwtq at 12lb of boost, no meth on 91 octane and the dyno room temp was 105 degree. Motor is a built 370 with a GT-42 Single Turbo. They asked me if I wanted to keep going and turn up the boost some more and start tuning with meth and I told them no, it was not necessary.
Reason being is that I'm actually really pleased with those numbers for right now, and I'm at the point where traction is an issue and not power. I also really need my truck the next few days.
So once the weather cools down a bit more, I'll figure I'll put her back up on the dyno, add a few more pounds of boost, add in the methanol and see what the truck will do in cooler weather. My guess is low 8xx's.

Here's the dyno sheet:
580+ ft/lbs from 3750 - 6000 rpm's is fun!!




Also...when I first brought them the truck they threw it up on the dyno just to see what's what and it was determined that on 5 cylinders at 7.5psi the truck was making 321rwhp!! That's what I was competing with at the Truckin Competition!



So anyways, trucks' back home and I unloaded my bike out of the back and took the truck out for a test spin finally and it is a whole lot of fun! I've only done a few pulls in first and second gear but once she hooks she pulls really hard!
If I get a chance I'll see if I can't get some vids next week.

Verz

iTrader: (21)

Still loving this truck

Richiethekiidd