injector help
injector help I was wondering if I could get some help on injector size for new setup before we go to dyno. Any help would be appreciated. thank you.
motor:
408 iron block
ported 317's
234/240 589/589 115
victor jr
76mm
big stuff 3 with 3 bar map
old setup was all the same on on stock 5.3 and had 60# injectors. any suggestions on setup and injectors would help. thanks again.
motor:
408 iron block
ported 317's
234/240 589/589 115
victor jr
76mm
big stuff 3 with 3 bar map
old setup was all the same on on stock 5.3 and had 60# injectors. any suggestions on setup and injectors would help. thanks again.
What is your HP goal? That will be a baseline factor for getting the injector sizing.
Here's one of many sites for calculating your injector requirements.
http://www.witchhunter.com/injectorcalc1.php4
Here's one of many sites for calculating your injector requirements.
http://www.witchhunter.com/injectorcalc1.php4
I was wondering if I could get some help on injector size for new setup before we go to dyno. Any help would be appreciated. thank you.
motor:
408 iron block
ported 317's
234/240 589/589 115
victor jr
76mm
big stuff 3 with 3 bar map
old setup was all the same on on stock 5.3 and had 60# injectors. any suggestions on setup and injectors would help. thanks again.
motor:
408 iron block
ported 317's
234/240 589/589 115
victor jr
76mm
big stuff 3 with 3 bar map
old setup was all the same on on stock 5.3 and had 60# injectors. any suggestions on setup and injectors would help. thanks again.
