.... Maybe in a couple years Ill have a bigger turbo/engine and get it down into the 8's with you 
1972 Nova Turbo Lsx Build
Well engine is in! I was a little worried, the more I would read about people installing Lsx into x-bodys people had tons of problems with the mounts and oil pan clearance. I am very happy I spent the money on the autokraft sheetmetal pan. The clearance from crossmember to floor is great and there is plenty of space between pan and crossmember. And the ebay 1" setback plates worked great as well. Its time to start on the hotside, I kind of wish I would of went the twins route but I have to many parts to turn back now.
With good fuel and light raceweight and good boost you might be surprised.
Check this 346 ls1 nova out
http://www.youtube.com/watch?v=6hnf-_WwNhk
http://www.youtube.com/watch?v=jx-Fw...eature=related
Check this 346 ls1 nova out
http://www.youtube.com/watch?v=6hnf-_WwNhk
http://www.youtube.com/watch?v=jx-Fw...eature=related
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Progress Update....
Its been a while due to work overload this summer and some motivational issues with the heat but its picking up steam again! Got all the front end sheet metal back on the car, Figured out the accessory drive and belt setup, car is now in the process of getting the turbo stuff all built. I wanted to make sure I am not limited to the 76mm with the build so there has been a great deal of planning going on. I am mocking up a pt4788 so when I build my next motor over the next year I can shoot for 1000whp+
Its been a while due to work overload this summer and some motivational issues with the heat but its picking up steam again! Got all the front end sheet metal back on the car, Figured out the accessory drive and belt setup, car is now in the process of getting the turbo stuff all built. I wanted to make sure I am not limited to the 76mm with the build so there has been a great deal of planning going on. I am mocking up a pt4788 so when I build my next motor over the next year I can shoot for 1000whp+
More of a final product of the intercooler mounting and started getting ideas for mounting the turbo. The turbo mounted currently is the pt4788 that will be used next year once the built 6.0l is done. So everything is being fitted with that turbo in mind but with the 5.3 the mp 76 q trim will be used. in the next 1-2 weeks the hotside will be done and progress will be picked up. Its starting to come together
progress update:
Well I have made a ton of forward progress on the car over the past month or two. The entire hot side is complete. and the cold side was completed as well. At first I was going to be using all mild steel but went to stainless and very pleased that I did on the hot side. Got the coils custom mounted, twin a 1000 pumps mounted, driveshaft hoop and a bunch of other miscellaneous stuff done. Got the new driveshaft made and installed, mounted remote trans cooler and shifter mount fabbed up. I am excited to get the forged 370 in it and get everything plumbed and wired then hit the rollers.
I am currently changing the one intercooler pipe to use the pro flo intake since I will be putting in the forged 6.0 before I get it tuned here at the first of the year and shoot for 1000+ RWHP.
I may be switching to a cable drive fuel pump or goto a magna fuel pump along with upping from the 83lb injectors to 160's as well. So I will have no issues making 1000-1200 on corn. I am not going to stop until I make it deep into the 8's.
Well I have made a ton of forward progress on the car over the past month or two. The entire hot side is complete. and the cold side was completed as well. At first I was going to be using all mild steel but went to stainless and very pleased that I did on the hot side. Got the coils custom mounted, twin a 1000 pumps mounted, driveshaft hoop and a bunch of other miscellaneous stuff done. Got the new driveshaft made and installed, mounted remote trans cooler and shifter mount fabbed up. I am excited to get the forged 370 in it and get everything plumbed and wired then hit the rollers.
I am currently changing the one intercooler pipe to use the pro flo intake since I will be putting in the forged 6.0 before I get it tuned here at the first of the year and shoot for 1000+ RWHP.
I may be switching to a cable drive fuel pump or goto a magna fuel pump along with upping from the 83lb injectors to 160's as well. So I will have no issues making 1000-1200 on corn. I am not going to stop until I make it deep into the 8's.
