Forced Induction Superchargers | Turbochargers | Intercoolers

FPR for my setup?

Thread Tools
 
Search this Thread
 
Old Dec 24, 2010 | 03:00 PM
  #1  
PPI Typhoon's Avatar
Thread Starter
On The Tree
iTrader: (1)
 
Joined: Nov 2005
Posts: 164
Likes: 0
From: Phoenix, AZ
Default FPR for my setup?

Ok, so I'm finally down to mapping out my fuel system for my S400/LQ4 setup in my Typhoon. I have aftermarket -8 rails, and my fuel system has a -8 feed, -6 return.

What would be the recommended FPR for the boosted LS motor and my setup.

Also, I know it's a no-no to mount it on the firewall. Can you mount it directly on the rails?

here is my setup:




Any help would be greatly appreciated.

Thanks,
Reply
Old Dec 24, 2010 | 07:20 PM
  #2  
LS1NOVA's Avatar
TECH Addict
iTrader: (12)
 
Joined: Nov 2002
Posts: 2,269
Likes: 12
From: Minneapolis,MN
Default

You can use any regulator that is boost referenced to raise fuel pressure 1 to 1 with boost and has the required ports for your -6 return. You can mount it right to the rail with a 3/8 male to male pipe fitting or run a short line to it away from the engine.
Reply
Old Dec 24, 2010 | 08:28 PM
  #3  
PPI Typhoon's Avatar
Thread Starter
On The Tree
iTrader: (1)
 
Joined: Nov 2005
Posts: 164
Likes: 0
From: Phoenix, AZ
Default

Cool thank you. They won't turn you away at the track with it mounted that way?
Reply




All times are GMT -5. The time now is 07:47 PM.